Lockwood Velocity Entrance Lockset - Element Lever L3 - Satin Chrome
The Lockwood VEL0/L3SCDP is the Velocity Entrance Lockset featuring the Element Lever L3 in Satin Chrome Brushed finish, supplied as a display pack for single-door retail or trade supply.
The Velocity Entrance Lockset is designed and manufactured to Australian Standards and is the latest development in the Lockwood entrance lockset range. It provides keyed entry from both the exterior and interior, combining an integrated cylinder on each side with a lever handle set. The lockset is engineered to complement the broader Velocity door handle range and shares lever styling with the Lockwood Nexion and Palladium ranges for design consistency throughout a home or project.
The 60mm backset latch is supplied as standard. A 70mm backset latch is available separately (order part 530-222SC). The lockset suits door thicknesses from 35mm to 45mm, is suitable for inward and outward opening timber doors, and supports field-selectable handing by set screw.
Estimated Warehouse Dispatch
Usually ships in 6 business days
Usually ships in 6 business days
Finish
Satin Chrome Brushed
This product is supplied in Satin Chrome Brushed finish only.
Key Features
- Velocity Entrance Lockset - keyed entry from both exterior and interior using integrated cylinders.
- Element Lever L3 design - contemporary lever profile designed for residential and light commercial entry doors.
- High security automatic deadlatch with 13mm projection brass bolt and safety release.
- Box strike supplied with concealed crossgrain door frame strengthening screws for improved strike security.
- 5 pin tumbler cylinder mechanism with 6 pin upgrade capability and 78,000 key combinations.
- Brass cylinders and brass barrels on both exterior and interior.
- Field-selectable handing by set screw - no need to specify handing at time of ordering.
- 60mm backset supplied as standard; 70mm backset available separately (part 530-222SC).
- Retrofittable - 63mm rose suits existing 50mm or 54mm diameter door bore holes.
- Can be keyed alike to other Lockwood door locks.
- Compatible with most restricted keying systems (using 001 inner barrel).
- Installation template included.
- Designed and manufactured to Australian Standards.
- 25-year Lockwood mechanical warranty.
What's in the Box
- 1 x Exterior lever and rose assembly (L3 Element, Satin Chrome)
- 1 x Interior lever and rose assembly (L3 Element, Satin Chrome)
- 1 x Latch body - 60mm backset, 13mm projection brass bolt
- 1 x Box strike with concealed crossgrain door frame strengthening screws
- 1 x Internal and external cylinder set (brass cylinders and brass barrels)
- 2 x Keys
- Mounting hardware and set screws
- Installation template
Suitable Uses
- Residential front entry doors
- Inward and outward opening timber frame entry doors
- Projects requiring consistent Velocity lever styling throughout
- Retrofit installations to existing 50mm or 54mm bore preparations
- Applications requiring keyed alike locksets across multiple doors
- Projects specifying restricted keying systems
Full Specifications
Lever L3 Element - Dimensions
Manufacturer dimensional drawing - Lever L3 Element front view showing lever length, projection, and finger clearance.
Manufacturer dimensional drawing - Lever L3 Element side profile showing rose projection and lever geometry.
Manufacturer dimensional drawing - Lever L3 Element showing rose diameter, bore compatibility, and installation measurements.
Rose: 63mm diameter x 12.5mm projection. Lever length: 122mm. Lever projection: 54.5mm. Finger clearance: 47.5mm. Rose suits 50mm or 54mm existing door bore holes.
Frequently Asked Questions
- What is the difference between the VEL0/L3SCDP and the VEL0/L3SC5?
The VEL0/L3SCDP is a single display pack - one lockset in retail packaging for single-door supply or trade replacement. The VEL0/L3SC5 is a builder's 5-pack of the same lockset in trade packaging. The lockset itself is mechanically identical in both packs. - Can I order a 70mm backset version?
The VEL0/L3SCDP is supplied with a 60mm backset latch as standard. A 70mm backset latch is available separately - order part number 530-222SC. The 70mm backset is appropriate when the door stile or existing lock cutout requires the greater distance from the door edge. - Can this lockset be keyed alike to other locks on the same property?
Yes. The Velocity Entrance Lockset can be keyed alike to other Lockwood door locks where the same key cylinder system is used. Specify keyed alike requirements at time of ordering. The lockset is also compatible with most restricted keying systems using the 001 inner barrel. - Is handing specified at time of ordering?
No. The Velocity Entrance Lockset is field-selectable for handing using the set screw supplied. Left-hand or right-hand operation can be set on site during installation - no handing specification is required at the point of order. - Is this lockset suitable for outward-opening doors?
Yes. The Velocity Entrance Lockset is suitable for both inward and outward opening timber doors. The automatic deadlatch and safety release function correctly in both configurations.
Additional Information
- Automatic Deadlatch:
The Velocity Entrance Lockset incorporates an automatic deadlatch. When the door is closed, the deadlatch bolt is automatically deadlocked by the auxiliary plunger bearing against the strike plate. This prevents the latch from being forced back with a thin tool. The safety release allows the latch to retract freely from the inside lever during normal operation. - Box Strike and Frame Strengthening:
The supplied box strike includes concealed crossgrain door frame strengthening screws. These screws anchor into the door frame at an angle to resist kick-in force, improving the overall security performance of the installation without additional hardware. The crossgrain screws should be installed as part of the standard fitting procedure. - Retrofit Suitability:
The 63mm Velocity rose is engineered to cover both the 50mm and 54mm door bore hole diameters commonly found in Australian residential door preparations. This makes the VEL0/L3SCDP suitable for direct replacement of most existing entrance locksets without requiring door re-boring. - Lever Styling Compatibility:
The Element L3 lever used in this entrance lockset is the same lever profile used across the Velocity Series passage, privacy, and dummy half sets. This allows a consistent lever appearance to be maintained across all doors in a home or project by specifying the L3 lever throughout the Velocity range. - Display Pack vs Builder's Pack:
The DP (Display Pack) suffix indicates single retail packaging. The same lockset is available in a 5-pack (VEL0/L3SC5) and a 5-pack keyed alike variant (VEL0/L3SC5KA) for multi-door builder supply.
Lockwood Warranty (Australia)
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
Cosmetic finishes, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights available under the Australian Consumer Law.
Download PDF Resources
Lockwood Mechanical Entry Locksets Catalogue
Lockwood Mechanical Entry Locksets Catalogue
Download PDF Resources
Lockwood Mechanical Entry Locksets Catalogue
Lockwood Mechanical Entry Locksets Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
