Raven RP62 Anti-Finger Jamb Seal Hinge Side 2500mm - Light Grey and Black
The Raven RP62X2500LGBK is a hinge side safety strip designed to reduce the risk of finger trapping on doors. It is fixed to both the door and the jamb on the hinged side and suits doors opening from 0 to 180 degrees, including butt hinged and centre pivot doors. The seal features a reversible flexible PVC gasket that can be presented in either light grey or black.
Key Features
- Anti-finger jamb seal for hinge side door protection.
- Designed for doors opening from 0 to 180 degrees.
- Suitable for butt hinged and centre pivot doors.
- Reversible flexible PVC gasket in light grey or black.
- Screw fixed aluminium carrier with pre-slotted fixing holes.
- Cover strips supplied in matching light grey and black.
- Durability tested to BS 8613:2017 Class 1 for finger protection devices.
Specifications
- Item Code: RP62X2500LGBK
- Brand: Raven
- Door Seal Type: Anti-finger jamb seal
- Door Seal Set: Individual seal
- Seal Material: Reversible flexible PVC rubber
- Carrier: Anodised aluminium
- Fixing Method: Screw fixed
- Door Opening Range: 0 to 180 degrees
- Overall Length: 2500 mm
- Finish: Light Grey and Black
- Fire Rated: No
- Durability Standard: BS 8613:2017 Class 1
What's In The Box
- 1 × Anti-finger jamb seal with aluminium carrier - 2500 mm
- Reversible light grey and black PVC gasket
- Light grey and black flexible PVC cover strips
- Zinc plated cross recess self tapping fixing screws
Suitable Uses
- Hinge side of doors where finger trapping protection is required.
- Schools, childcare centres, medical facilities, and public buildings.
- Commercial and institutional doors with high pedestrian traffic.
- Butt hinged or centre pivot doors opening up to 180 degrees.
Dimensions
Frequently Asked Questions
- Where is this anti-finger seal installed?
It is installed on the hinge side of the door, fixed to both the door and the jamb to cover the gap created during opening. - Is the gasket colour fixed?
No. The gasket is reversible and can be installed to show either the light grey or black side. - Should the seal run the full height of the door?
For maximum finger protection, it is recommended to install the seal for the full height of the door and jamb.
Additional Information
- Anti-finger seals are commonly specified in schools and childcare facilities where the hinge side gap presents a known injury risk.
- Full height installation is generally preferred, as partial lengths may still leave pinch points at the top or bottom of the door.
- Longer openings can be achieved by butt joining multiple lengths where required.
