Lockwood FD2616-116SIL Push Side End Angle Mounting Bracket for Double Doors Silver
The Lockwood FD2616-116SIL Push Side End Angle Mounting Bracket for Double Doors Silver is a Lockwood fire door closing system accessory used where a push side end angle mounting bracket is required for double door applications.
This item is supplied in Silver finish and is intended for use as part of the relevant Lockwood door closing system arrangement. It should be treated as a mounting accessory, not as a complete door closer or standalone fire door closing system.
The FD2616-116SIL is commonly specified in Australian commercial and industrial door hardware schedules where double door closing hardware requires a push side end angle bracket. Compatibility should always be checked against the closer system, door configuration, fixing position and project hardware schedule before ordering.
Usually ships in 3 business days
Key Features
- Push side end angle mounting bracket for compatible Lockwood double door closing applications
- Designed for use with Lockwood fire door closing systems where this bracket is specified
- Mounting accessory used to support correct closer installation geometry on double doors
- Supplied in Silver finish as confirmed by the product listing
- Suitable for replacement or project use where FD2616-116SIL is listed in the hardware schedule
- Lockwood mechanical warranty applies where purchased new in Australia from authorised resellers
Suitable Uses
- Compatible Lockwood fire door closing systems
- Double door closing arrangements requiring a push side end angle mounting bracket
- Commercial fire door closing installations where the hardware schedule specifies this item
- Replacement work where the existing or specified part number is FD2616-116SIL
- Commonly specified in Australian commercial and industrial sites using Lockwood door closing systems
Full Specifications
Frequently Asked Questions
Is the FD2616-116SIL a complete door closer?
No. The FD2616-116SIL is a push side end angle mounting bracket for double doors. It is a mounting accessory, not a complete closer.
Can this be used on any double door closer installation?
No. It should only be used where the compatible Lockwood fire door closing system or project hardware schedule specifies this push side end angle bracket.
Does this bracket have its own fire rating?
No standalone fire rating has been confirmed for the bracket alone. Fire door suitability must be assessed as part of the complete door closing system and approved door assembly.
Additional Information
- This bracket is most relevant to hardware schedules that specifically call for a push side end angle mounting bracket on double doors.
- A common ordering mistake is treating mounting brackets as interchangeable across closer systems. Always confirm the closer series and mounting position before ordering.
- Push side mounting geometry can affect closer performance, opening clearance and compliance with the door schedule.
- For fire door projects, the bracket, closer body, arms, fixing method and door assembly must all be checked together.
- When replacing an existing part, confirm the installed system and item code before ordering FD2616-116SIL.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Fire Door Closing Systems Catalogue
Lockwood Fire Door Closing Systems Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
