Zanda 7131.FF – Nitro Pull Handle, 900 mm (875 mm Centres) – Face Fix
The Zanda 7131.FF Nitro is the big, square-offset pull that makes an entrance. Radiused corners keep it comfortable in the hand; the Face Fix mounting keeps it rock-solid on the door. Built from 316 Marine Grade Stainless Steel, it’s made to handle weather, salt, and heavy use without looking tired. Available in Matt Black and Stainless Steel with a 20-Year Mechanical Warranty.
Key Features
- Bold 900 mm length for serious presence on the door
- Square offset design with radiused corners – confident, comfortable grip
- Face Fix installation – quick, rigid mount on timber or aluminium (glass with appropriate fixings)
- 316 Marine Grade Stainless Steel – built for coastal and commercial environments
- Matches the Nitro family across multiple sizes and finishes
- 20-Year Mechanical Warranty
Specifications
- Item Code: 7131.FF
- Type: Nitro Pull Handle – Face Fix
- Overall Length: 900 mm
- Centres (bolt spacing): 875 mm
- Tube Size: 25 mm × 25 mm
- Projection: 60 mm
- Offset: 35 mm
- Material: 316 Marine Grade Stainless Steel
- Finish Options: Matt Black, Stainless Steel
- Warranty: 20-Year Mechanical Warranty
What's In The Box
- 1 × Nitro Pull Handle — 900 mm (Face Fix)
- Face Fix fasteners (finish-matched)
- Installation instructions
Available Finish Options
-
Matt Black
7131.FF.BLK -
Stainless Steel
7131.FF.SS
Item Code Family – Zanda Nitro Pull Handle Series
Download PDF Resources
|
Zanda Pull Handles – Brochure |
|
Zanda Door Furniture Product Brochure |
|
Zanda Architectural Catalogue |
|
Zanda Commercial Hardware Catalogue |
|
Zanda Warranty |
Zanda Warranty
Zanda Architectural products carry a limited warranty against defects in material or workmanship under normal use during the warranty period. During the warranty period, Zanda Architectural will repair or replace the product (or the defective parts) at no charge, using new or refurbished replacement parts. Warranty periods vary by product range and by component (mechanical and finish), so please check the row that matches your product below.
Warranty Summary
* Warranty periods run from the proven date of purchase and apply only when the product is properly installed and subjected to no more than fair wear and tear. See the exclusions and important notes below for full conditions.
How to Make a Claim
Zanda's warranty process starts with the reseller you purchased from. As your place of purchase, we handle the claim for you:
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (the place of purchase) with your proof of purchase and the date the product was purchased.
- Provide a clear description of the fault, along with the product range and model.
- We complete the necessary claim forms and process the claim with Zanda Architectural on your behalf. You may be asked to return the product for assessment.
- If the product is found to be defective under the warranty terms, Zanda will repair or replace it at no charge, using new or refurbished parts.
Exclusions
A warranty claim cannot be accepted for damage unless it resulted from a defect in Zanda's materials and workmanship. The following are expressly excluded:
- Surface damage occurring after purchase and not caused by defects in materials and workmanship.
- Misuse, neglect or accidental damage.
- Failure to maintain and care for the product.
- Defects or damage caused by using the product for a purpose other than that for which it was designed, such as commercial use.
- Defects or damage caused by improper installation.
- Damage caused by batteries.
- Modification and/or alteration to the product.
- Discolouration and scratches to finishes through normal use and ageing.
- Replacement of batteries.
- Normal wear and tear.
This guarantee does not extend to labour costs, freight, personal loss, death or injury, or economic, consequential or property damage of any kind. The warranty also excludes extreme environments where heat, weather and salty conditions are prevalent, and does not cover products that have not been properly maintained.
Important Notes
The products covered by this warranty are designed for residential use only - any other use (including commercial use) voids the warranty. This is a parts-only warranty: it does not cover labour costs for product removal and reinstallation.
Proper maintenance, care, cleaning and polishing in accordance with Zanda's instructions are essential to retain a product's finish - particularly soft finishes or finishes that naturally age, such as Brushed Nickel, Satin Chrome, Polished Brass, Graphite Nickel, Matt Chrome, Unlacquered Brass, Matt Brass, Rumbled Brass, Roman Brass, Natural Bronze, Oil Rubbed, Satin Brass, Brushed Bronze, Antique Bronze, Buffed Bronze, Matt Antique Bronze, Venetian Bronze and Powdercoat. These finishes are subject to deterioration, corrosion and oxidation from conditions such as salt deposits, scratches from sharp objects, paint thinners and caustic agents. For care of stainless steel products, see the ASSDA guidance on preventing coastal corrosion and tea staining.
This is a limited, express warranty and is provided in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Nothing in this express warranty limits or restricts any other statutory right or remedy available to you.
