Lockwood LC88 Cable Transfer Device Lead Cover - Chrome Plate
The Lockwood LC88 Cable Transfer Device Lead Cover is designed to provide protected cable transfer between the door and frame in electric locking applications. It helps maintain an unbroken wired connection from the controller to the lock while allowing normal door movement.
The LC88 range is supplied in Chrome Plate and is available in two confirmed length variants: LC8810 at 277mm and LC8811 at 497mm. The correct model depends on door opening angle and the hinge-side gap between the door and frame.
This lead cover is commonly used with electric mortice lock installations where the cable route must be protected, concealed when closed and resistant to tampering.
Parent listing typically ships in 2 Days. LC8811 variant is listed with an 11 Day dispatch time.
Non-Returnable Item: This product is a special order and is not returnable.
Key Features
- Provides protected cable transfer between door and frame
- Maintains an unbroken connection from controller to lock
- Accepts cable up to 8mm in diameter
- Vandal-resistant chrome plated steel flexible lead cover
- Completely concealed when the door is closed
- Available in 277mm and 497mm length variants
- Fire rated up to 4 hours on fire door assemblies in accordance with AS 1905.1:2005
Suitable Uses
- Electric mortice lock installations
- Electric locking applications requiring cable transfer from frame to door
- Hinged doors requiring concealed cable protection when closed
- Fire door assemblies where the tested installation conditions are met
- Commercial and institutional doors using compatible electric locking hardware
Fire Rated
- Successfully fire rated up to 4 hours on fire door assemblies.
- Tested in accordance with AS 1905.1:2005, Part 1: Fire resistant door sets.
- Fire performance depends on the complete door assembly, door hardware configuration and installation matching the tested conditions.
Full Specifications
Frequently Asked Questions
Which version should I choose, LC8810 or LC8811?
LC8810 is the shorter 277mm unit for hinged doors opening to 90 degrees, with a maximum of 120 degrees. LC8811 is the longer 497mm unit for doors opening more than 120 degrees or where the pin hinge to frame gap is more than 20mm.
Is LC8811 suitable for centrally pivoted doors?
No. The supplied product data specifically states that LC8811 is not suitable for centrally pivoted doors.
Is this product fire rated?
Yes. The LC88 range is listed as successfully fire rated up to 4 hours on fire door assemblies in accordance with AS 1905.1:2005.
Additional Information
- Select the lead cover length based on the door opening angle and hinge-side geometry, not only on visual preference.
- For electric locking, confirm the cable diameter is within the stated 8mm maximum before installation.
- Lead covers should be routed so the door can open fully without straining, pinching or sharply bending the cable.
- Commonly specified in Australian commercial access control and electric mortice lock installations.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Electric Mortice Locks Catalogue
Lockwood Electric Mortice Locks Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
