Lockwood L432SPDP Door Bumper and Hook Satin Chrome Pearl
The Lockwood L432SPDP Door Bumper and Hook Satin Chrome Pearl combines a coat hook function with a door bumper, making it useful where a door may swing back towards a wall or adjacent surface. The nylon cushion tip helps reduce impact damage when the product is mounted behind a door.
This model is made from zinc alloy castings and is supplied individually display packed with fixing screws. It is suited to residential and light commercial applications where a simple hook and bumper combination is required.
The L432 range is commonly specified in Australian homes, apartments, offices and back-of-house areas where a compact wall mounted hook is needed with the added benefit of door impact protection.
Usually ships in 3 business days
Key Features
- Combined door bumper and hook for practical wall mounted use
- Nylon cushion tip helps reduce damage when mounted behind a door
- Zinc alloy cast construction as confirmed by Lockwood product information
- Supplied individually display packed
- Comes complete with fixing screws
- Reversible installation with no handed operation requirement
- Satin Chrome Pearl finish supplied for this item code
- Lockwood mechanical warranty applies where purchased new in Australia from authorised resellers
Suitable Uses
- Behind-door wall hook applications
- Residential bedrooms, bathrooms, laundries and entry areas
- Apartment and townhouse door hardware upgrades
- Light commercial offices, staff rooms and amenities areas
- Locations where a hook and door bumper are both useful in one fitting
Full Specifications
Fire Rated
- No fire rating has been confirmed for the L432 door bumper and hook.
- This product is a door accessory and should not be treated as certified fire door hardware on its own.
- For fire rated door assemblies, confirm the complete approved hardware schedule before adding wall mounted accessories behind the door.
Certifications and Compliance
- Distributor data identifies the L432 door bumper and hook as AS1428.1 compliant when installed to local building codes and used with compliant accessories.
- Compliance depends on mounting height, projection, surrounding clearances and the specific project requirements.
- For public access buildings, confirm placement against the project access consultant or relevant Australian accessibility requirements.
Frequently Asked Questions
Is this just a coat hook?
No. The L432 combines a hook with a nylon cushion tip, so it can also act as a bumper when mounted behind a door.
Are fixing screws included?
Yes. Lockwood product information confirms the L432 is supplied complete with fixing screws.
Can it be used in public access areas?
It may be suitable where correctly positioned, but mounting height, projection and local accessibility requirements should be checked before installation.
Additional Information
- The L432 is useful where a door swings towards a wall and a hook is also needed in the same location.
- Before fitting, check that the door will contact the nylon cushion tip rather than the hook body or wall surface.
- For hollow walls or plasterboard, use suitable wall anchors or fix into framing where load and impact are expected.
- Do not mount the hook where coats, bags or towels may obstruct door hardware, emergency egress or access clearances.
- For multi-room projects, keep finish selection consistent across hooks, door stops and other visible general hardware.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood General Hardware Catalogue
Lockwood General Hardware Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
