Dormakaba Door Closer Limiting Stop to suit TS91 TS92 TS93 Slide Rail
Key Features
- Cushioned limiting stop that slides into the slide rail channel.
- Adjustable opening limitation between 80 degrees and 120 degrees.
- Helps prevent the door leaf impacting adjacent walls during normal opening.
- Suitable for retrofitting into existing compatible slide rail channels.
- Designed to suit Dormakaba TS91, TS92 and TS93 slide rail door closers.
Fire Rated
- Required for fire rated doors when used with compatible TS91, TS92 or TS93 slide rail closer configurations.
Specifications
- Item Code: DOTS92LS
- Product Type: Cushioned limiting stop (limit stay)
- Compatible Closers: TS91, TS92, TS93
- Mounting: Slide rail G-N channel
- Adjustment Range: 80 degrees to 120 degrees
- Fire Rated: Yes (required for fire rated doors)
What's In The Box
- 1 x Cushioned limiting stop for slide rail channel
Suitable Uses
- Fire door installations using TS91, TS92 or TS93 slide rail closer setups where an opening limitation is required.
- Doors that open toward walls, glazing or joinery where impact protection is needed.
- Retrofit upgrades to existing slide rail channels to reduce door over travel.
Dimensions
Download PDF Resources
|
Dormakaba TS91 and TS92 Door Closer Brochure |
Frequently Asked Questions
- Is this an overload protection device?
No. It limits opening during normal use but it is not designed to replace a proper door stop where impact loads are high. - Do I need this on a fire door?
Yes, it is required for fire rated door configurations when using compatible TS91, TS92 or TS93 slide rail closers. - Can it be retrofitted into an existing slide rail?
Yes, it can be added later by sliding it into the compatible slide channel.
Additional Information
- In corridors and small rooms, limiting the opening angle helps reduce damage to plaster, glazing and adjacent hardware.
- If the door is frequently forced beyond the stop point, a floor or wall mounted door stop is usually still required.
- Set the limitation angle during commissioning so the door clears handles and latches without striking nearby walls.
dormakaba Warranty
dormakaba Australia Pty Ltd (ABN 14 067 969 466) provides the following warranty on all dormakaba branded products sold in Australia. This warranty is in addition to, and does not limit, your rights under the Australian Consumer Law.
Warranty Summary
How to Make a Claim
For full returns and warranty claim procedures, visit our
Returns & Warranty page
� this is kept up to date and is the authoritative reference for current claim steps.
- Report the defect promptly. Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (including Gold Coast Smart Locks) as your point of sale in the first instance. Claims must be lodged no later than 1 month from the date the defect becomes obvious.
- Prepare your documentation. You will need proof of purchase (invoice or receipt), the date of delivery or installation, your name and address, and any maintenance records relevant to the product.
- Make the product available for inspection. dormakaba requires adequate access to the goods, fittings, and fixtures to assess any warranty claim and carry out repairs. If no fault is found, dormakaba's standard costs for inspection, service, and testing apply.
- Warranty work is conducted during normal business hours � 8:00am to 5:00pm, Monday to Friday.
Note: The expense of making a warranty claim (including transport and access costs) is borne by the purchaser.
Exclusions
This warranty does not cover:
- Damage or defects caused by misuse, abuse, neglect, or failure to follow dormakaba's selection, installation, and maintenance instructions
- Fair wear and tear
- Damage arising from installation not carried out by dormakaba or its authorised agents
- Damage caused to the structures the product is installed in, where installation was not by dormakaba or its authorised agents
- Damage caused by circumstances beyond dormakaba's control
- Defects within acceptable industry variances
- Products used other than for their intended purpose
- Damage from exposure to abnormal conditions, including but not limited to extreme temperature, water, fire, humidity, pressure, or stress
- Products that have been modified, built on, or repaired by a third party
- Products not maintained in accordance with dormakaba's care, cleaning, and maintenance instructions (as amended from time to time on the dormakaba website)
- Routine maintenance items (the purchaser's responsibility)
- Products installed, maintained, or operated other than in accordance with dormakaba's instructions
- Overhaul, replacement, or repair work carried out prior to dormakaba's approval of a warranty claim
Important Notes
Australian Consumer Law
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure, and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. Nothing in this warranty limits or excludes these statutory rights.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure, and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. Nothing in this warranty limits or excludes these statutory rights.
Replacement & Repair
dormakaba reserves the right to replace defective parts with components of similar quality, grade, and composition where an identical part is unavailable. Refurbished parts or goods of the same type may be used. For discontinued or unavailable products, dormakaba may substitute an equivalent current product. All products replaced under warranty become the property of dormakaba.
dormakaba reserves the right to replace defective parts with components of similar quality, grade, and composition where an identical part is unavailable. Refurbished parts or goods of the same type may be used. For discontinued or unavailable products, dormakaba may substitute an equivalent current product. All products replaced under warranty become the property of dormakaba.
