ADI Pin Only Suits 444/889 – Chrome Plated
The ADI Pin Only suits 444/889 – Chrome Plated is a hardened and tempered locking pin designed for use with ADI Blocklok 444 single systems and legacy ADI 889 Blocklok units. Supplied as the pin component only, it is commonly used as a replacement or where extended pin length is required.
Key Features
- Locking pin only (no lock body supplied).
- Designed to suit ADI Blocklok 444 single and legacy 889 systems.
- 13 mm diameter hardened and tempered 4140 steel.
- Chrome plated finish.
- Standard and extended pin lengths available.
- Australian made and owned.
Specifications
- Product Type: Locking pin only
- Compatibility: ADI Blocklok 444 (single) and legacy 889
- Material: Hardened and tempered 4140 steel
- Pin Diameter: 13 mm
- Finish: Chrome Plated
- Country of Manufacture: Australia
What's In The Box
- 1 × ADI locking pin (length as selected)
Suitable Uses
- Replacing worn or damaged pins on ADI Blocklok 444 single locks
- Servicing legacy ADI 889 Blocklok systems
- Increasing pin engagement where door gaps require longer pins
Available Pin Length Variants
Item Code Family – ADI Blocklok Locking Pins
Download PDF Resources
|
ADI Product Catalogue |
Frequently Asked Questions
Does this pin suit double Blocklok models?
No. This pin is designed for single Blocklok 444 and legacy 889 systems only.
When should I use a longer pin?
Extended pins are used where increased door gap or alignment requires additional engagement.
Is this supplied with the lock body?
No. This product is supplied as the locking pin only.
Additional Information
- Legacy ADI 889 systems remain serviceable using this pin.
- Correct pin length selection is critical for secure engagement.
- Commonly specified in Australian commercial door installations.
ADI / Snap One Warranty
Warranty Summary
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries first. All warranty claims must be initiated through us - contact Gold Coast Smart Locks via our Returns & Warranty page with your order details and a description of the fault.
- Retain proof of purchase. Your invoice or receipt showing the purchase date is required to establish the warranty period.
- Notify within 30 days of discovering the fault. The Snap One warranty requires notice of any non-conformity within 30 days of discovery and within the applicable warranty period.
- Return Merchandise Authorisation (RMA). If a return is required, a RMA number will be issued. Products must be securely packed and returned within 30 days of the RMA being issued, with the RMA number clearly marked on the outside of the packaging. Return freight costs are the customer's responsibility.
- Assessment and outcome. Once a valid claim is received, Snap One will - at their discretion - repair, replace, or refund the product.
Exclusions
The following are not covered under the Snap One Limited Hardware Warranty:
- Damage caused by shipping or delivery services, or by improper opening of product packaging
- Operation, storage, or use outside the environmental and temperature specifications in the product documentation
- Acts of God - including flood, fire, earthquake, lightning, pandemic, or electrical surges
- Unauthorised repair or installation by the customer or a third party
- Accident, abuse, misuse, or neglect
- Use of incompatible devices, accessories, or incorrect voltage, fuses, or circuit breakers
- Interference from radio frequencies, infrared sources, or physical obstacles
- Normal wear and tear
- Failure to install, maintain, or repair in accordance with product documentation and applicable law
- Products modified to alter functionality without express written permission from Snap One
- Batteries and consumable parts (unless the damage was caused by a defect in materials or workmanship)
- Cosmetic damage - including scratches, dents, and normal wear
- Products where the serial number has been altered, removed, or defaced
- On-site labour costs for diagnosis, removal, repair, reinstallation, or reprogramming
- Third-party hardware or software, including functionality of third-party products controlled by ADI/Snap One products
- Damage to other property caused by a product not working properly
- Third-party products distributed by ADI/Snap One (these carry only the original manufacturer's warranty, if any)
Important Notes
ADI is a distributor, not a manufacturer.
ADI Global Distribution does not itself provide a product warranty. The Snap One Limited Hardware Warranty applies to products manufactured by Snap One, LLC and its family of brands (Control4, Pakedge, Clare, Triad, Wirepath, and others). Third-party products sold through ADI carry only the original manufacturer's warranty, if one exists.
ADI Global Distribution does not itself provide a product warranty. The Snap One Limited Hardware Warranty applies to products manufactured by Snap One, LLC and its family of brands (Control4, Pakedge, Clare, Triad, Wirepath, and others). Third-party products sold through ADI carry only the original manufacturer's warranty, if one exists.
Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Data backup before service.
Before sending any product for warranty service, back up any stored data or settings and disable any security passwords. Product contents may be deleted and storage media reformatted in the course of warranty service. Recovery of software, programming, or user data is not covered under the warranty.
Before sending any product for warranty service, back up any stored data or settings and disable any security passwords. Product contents may be deleted and storage media reformatted in the course of warranty service. Recovery of software, programming, or user data is not covered under the warranty.
