ADI Lever Handle Internal Only Suits LB702 and LB712 and LB802 - Chrome Plate
The ADI ADILEVERHANDLEIMP is an internal replacement lever handle for ADI locking bar hardware. It is designed to suit the inner handle position on LB702 series, LB712 series, and LB802 series assemblies, providing a straightforward service replacement when the original handle is worn or damaged.
Key Features
- Internal lever handle only for ADI locking bar assemblies.
- Designed to suit LB702, LB712, and LB802 series inner positions.
- Service replacement part for maintenance and refurbishment.
- Chrome Plate finish.
Specifications
- Item Code: ADILEVERHANDLEIMP
- Brand: ADI
- Product Type: Internal lever handle (replacement)
- Suits: LB702 series inner, LB712 series inner, LB802 series inner
- Finish: Chrome Plate
What's In The Box
- 1 x internal lever handle (Chrome Plate)
Suitable Uses
- Replacement internal handle for LB702, LB712 and LB802 locking bar assemblies.
- Maintenance where the original internal lever is loose, worn, or damaged.
- Commercial and industrial door hardware servicing.
Frequently Asked Questions
- Is this handle for the inside or outside of the door?
This is an internal lever handle only, designed for the inner handle position. - Which locking bar models does this suit?
It suits LB702 series inner, LB712 series inner, and LB802 series inner assemblies. - Does this include the full locking bar kit?
No. This listing is for the lever handle only.
Additional Information
- When replacing an internal lever handle, installers typically check spindle wear and fixing tightness to prevent repeat loosening.
- Confirm the handle is required for the inner position, as external handle sets may differ depending on locking bar configuration.
- Commonly specified in Australian commercial and industrial sites where ADI locking bars are installed.
ADI / Snap One Warranty
Warranty Summary
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries first. All warranty claims must be initiated through us - contact Gold Coast Smart Locks via our Returns & Warranty page with your order details and a description of the fault.
- Retain proof of purchase. Your invoice or receipt showing the purchase date is required to establish the warranty period.
- Notify within 30 days of discovering the fault. The Snap One warranty requires notice of any non-conformity within 30 days of discovery and within the applicable warranty period.
- Return Merchandise Authorisation (RMA). If a return is required, a RMA number will be issued. Products must be securely packed and returned within 30 days of the RMA being issued, with the RMA number clearly marked on the outside of the packaging. Return freight costs are the customer's responsibility.
- Assessment and outcome. Once a valid claim is received, Snap One will - at their discretion - repair, replace, or refund the product.
Exclusions
The following are not covered under the Snap One Limited Hardware Warranty:
- Damage caused by shipping or delivery services, or by improper opening of product packaging
- Operation, storage, or use outside the environmental and temperature specifications in the product documentation
- Acts of God - including flood, fire, earthquake, lightning, pandemic, or electrical surges
- Unauthorised repair or installation by the customer or a third party
- Accident, abuse, misuse, or neglect
- Use of incompatible devices, accessories, or incorrect voltage, fuses, or circuit breakers
- Interference from radio frequencies, infrared sources, or physical obstacles
- Normal wear and tear
- Failure to install, maintain, or repair in accordance with product documentation and applicable law
- Products modified to alter functionality without express written permission from Snap One
- Batteries and consumable parts (unless the damage was caused by a defect in materials or workmanship)
- Cosmetic damage - including scratches, dents, and normal wear
- Products where the serial number has been altered, removed, or defaced
- On-site labour costs for diagnosis, removal, repair, reinstallation, or reprogramming
- Third-party hardware or software, including functionality of third-party products controlled by ADI/Snap One products
- Damage to other property caused by a product not working properly
- Third-party products distributed by ADI/Snap One (these carry only the original manufacturer's warranty, if any)
Important Notes
ADI is a distributor, not a manufacturer.
ADI Global Distribution does not itself provide a product warranty. The Snap One Limited Hardware Warranty applies to products manufactured by Snap One, LLC and its family of brands (Control4, Pakedge, Clare, Triad, Wirepath, and others). Third-party products sold through ADI carry only the original manufacturer's warranty, if one exists.
ADI Global Distribution does not itself provide a product warranty. The Snap One Limited Hardware Warranty applies to products manufactured by Snap One, LLC and its family of brands (Control4, Pakedge, Clare, Triad, Wirepath, and others). Third-party products sold through ADI carry only the original manufacturer's warranty, if one exists.
Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Data backup before service.
Before sending any product for warranty service, back up any stored data or settings and disable any security passwords. Product contents may be deleted and storage media reformatted in the course of warranty service. Recovery of software, programming, or user data is not covered under the warranty.
Before sending any product for warranty service, back up any stored data or settings and disable any security passwords. Product contents may be deleted and storage media reformatted in the course of warranty service. Recovery of software, programming, or user data is not covered under the warranty.
Further Information
