ABUS 65/50HB80 Brass Padlock - Long Shackle
The ABUS 65/50HB80 is a solid brass padlock fitted with an 80 mm hardened steel long shackle for applications requiring additional reach. It features a double locking mechanism and precision pin tumbler cylinder, and is supplied keyed alike to KA501.
Key Features
- 80 mm hardened steel long shackle allows access around deep or recessed fittings.
- 50 mm solid brass body offers corrosion resistance and durability.
- Double locking mechanism improves resistance to pulling and twisting.
- Hardened steel shackle with Nano-Protect coating for improved cut resistance.
- Precision pin tumbler cylinder for consistent key operation.
Specifications
- Item Code: 6550HB80KA1
- Body Material: Solid brass
- Body Width: 50 mm
- Shackle Material: Hardened steel with Nano-Protect coating
- Shackle Diameter: 8 mm
- Horizontal Shackle Clearance: 28 mm
- Vertical Shackle Clearance: 80 mm
- Locking Mechanism: Double locking
- Keying: Keyed alike (KA501)
- Key Blank: AB14
- Rekeyable: No
- Packaging: Boxed
What's In The Box
- 1 × ABUS 65/50HB80 brass padlock
- Keys supplied keyed alike to KA501
Suitable Uses
- Gates, chains, and fixtures with deep-set or offset hasps.
- Applications where standard shackle length will not reach.
- Situations requiring flexibility rather than maximum shackle protection.
Standard vs Long vs Concealed Shackle Chooser
| Shackle Type | Best For | Trade-Off |
|---|---|---|
| Standard Shackle | General-purpose locking | Limited reach |
| Long Shackle (This model) | Deep or offset fixing points | Greater exposure to cutting and leverage |
| Concealed Shackle | High-security, attack-prone locations | Reduced clearance flexibility |
ABUS 65 Series – Item Code Family
Download PDF Resources
|
ABUS Padlocks Catalogue |
Additional Information
- Long shackle padlocks provide essential clearance but are more exposed to cutting and leverage than standard or concealed shackle designs.
- Trade installers commonly pair long shackle padlocks with shielded hasps to reduce attack surface.
- Where cutting attacks are frequent, upgrading to a concealed shackle model is often recommended.
- Correct hasp alignment is critical to prevent side loading on the extended shackle.
ABUS Warranty
ABUS products sold by Terry’s Tradies Pty Ltd and its associated websites and subsidiaries are backed by a manufacturer’s warranty covering defects in materials and workmanship, and your rights under the Australian Consumer Law (ACL). Warranty periods vary by product line — refer to your product packaging or contact us at the time of purchase for the period that applies to your specific model.
Warranty Summary
How to Make a Warranty Claim
For full returns and warranty claim procedures, visit our
Returns & Warranty page
— this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry’s Tradies Pty Ltd at your original place of purchase first — all warranty claims must be directed to the retailer where the product was purchased.
Phone: 07 5601 1867
Visit: U9/2 Prosper Crescent, Burleigh Heads QLD 4220 - Have your proof of purchase ready (receipt or order confirmation).
- If the fault is not immediately visible in person, provide clear photos showing the defect so the item can be assessed before a Return Merchandise Authorisation (RMA) is approved.
- Do not return the item before receiving RMA approval — items returned without approval may be sent back to you at your cost.
- Once approved, you will receive return instructions. If the item is confirmed faulty, a prepaid return freight label will be provided to cover return shipping costs.
What the Warranty Does Not Cover
- Normal wear and tear
- Damage caused by misuse, abuse, or improper installation
- Damage caused by neglect or failure to follow product instructions
- Products not purchased from an authorised retailer
Important Note
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
