Lockwood 225 Artefact Interior Rectangular Plate - DDA Accessible Turnknob & Lever 96 | Marine Grade & Satin Stainless Steel
The Lockwood 225 Series Artefact Interior Rectangular Plate with DDA Accessible Turnknob and Lever 96 combines a DDA-accessible lever-form turnknob meeting AS1428.1-2009 with a DDA-compliant Lever 96 for accessible interior locking and lever-operated latch release.
This is a HANDED function - specify Left or Right Hand at order. Available in 316 Marine Grade and Satin Stainless Steel. Note: replace NN with NS in the cylinder code when ordering with the Selector 3770 Series. Visible fixings (screws not included). Pairs with the 224 Series exterior plate.
Usually ships in 11 business days
Please confirm handing and suitability. HANDED function - L or R must be specified.
Available Finish Options
316 Marine Grade
MG- Satin Stainless Steel
SS
Available in left and right hand.
Fire Rated
- Fire rated up to 4 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Disability Act Compliance (DDA)
- The DDA-accessible turnknob meets the requirements of AS1428.1-2009, Design for Access and Mobility, providing an accessible interior turn operation for people with limited hand strength or dexterity.
- Lever compliance also meets AS1428.1-2009 where applicable. Compliance relates to hardware design only and does not imply full building compliance.
Key Features
- Rectangular 162 x 50mm interior plate with square ends - Lockwood Artefact 225 Series
- DDA Accessible Turnknob and Lever (Function 39) - HANDED function
- DDA lever-form accessible turnknob - meets AS1428.1-2009
- Lever 96 - AS1428.1-2009 compliant. Length 124mm, Projection 55mm, Finger Clearance 35mm.
- 316 Marine Grade and Satin Stainless Steel. Visible fixings. Fixing screws not included.
- Note: replace NN with NS when ordering with Selector 3770 Series.
- Fire rated to 4 hours - AS1905.1:2005. Level D8 (500,000 cycles). 25-year mechanical warranty.
Full Specifications
Item Codes
Plate Dimensions & Technical Drawings
Helpful Tips
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on left.
- Selector 3770 Series: For use with Selector 3770, replace NN with NS in the cylinder type code.
- DDA turnknob: Function 39 uses an accessible lever-form turnknob that is easier to operate for people with limited hand strength or dexterity.
- Fixing screws not supplied: The visible fixing screws for this interior plate must be ordered separately.
- Interior plate - pairs with 224 Series: This is the inside face plate with visible fixings. It must be paired with a 224 Series exterior plate (rectangular, concealed fixings). Fixing screws not included.
- Door thickness: 35-45mm as standard. For 45-55mm order SP2000-208 long fixing screws. Maximum 65mm with appropriate accessories.
- Non-returnable: Confirm finish and handing before ordering.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Stainless Steel: Up to 10 years
- 316 Marine Grade: Up to 10 years
Lockwood offers a comprehensive range of plate door handle series to suit residential, commercial and institutional applications.
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
