Lockwood 225 Artefact Interior Rectangular Plate - Cylinder Only | Satin Stainless Steel
The Lockwood 225 Series Artefact Interior Rectangular Plate with Cylinder Only features a Lockwood 570 Series oval cylinder hole on the interior face with no lever. Keyed interior access without a lever. Cylinder not included. Non-handed.
This interior plate uses visible fixings (screws not included) and pairs with the 224 Series exterior plate. Supplied in Satin Stainless Steel.
Estimated Warehouse Dispatch
Usually ships in 11 business days
Usually ships in 11 business days
Special Order - Non-Returnable Item
Please confirm finish, handing and suitability before ordering.
Please confirm finish, handing and suitability before ordering.
Available Finish Options
Satin Stainless Steel
SS - Non-handed
Fire Rated
- Fire rated up to 4 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Key Features
- Rectangular 162 x 50mm interior plate with square ends - Lockwood Artefact 225 Series
- Cylinder Only (Function 00) - keyed access, no lever
- Accepts Lockwood 570 Series oval cylinder - 32mm (H) x 18mm (W). Cylinder not included - order separately.
- Non-handed. Satin Stainless Steel.
- Visible fixings - countersunk holes top and bottom. Fixing screws not included.
- Fire rated to 4 hours - AS1905.1:2005. 25-year mechanical warranty.
Full Specifications
Plate Dimensions & Technical Drawings
Plate dimension drawing - 162 x 50mm rectangular profile with square ends and cross-section details.
Standards and compliance - fire rating, Level D8 cycling test and anti-corrosion.
Functions diagram - full range of 224/225 Series plate configurations.
Ordering procedure for the 224/225 Series - plate type, function, engraving, cylinder, lever, handing and finish codes.
Helpful Tips
- Cylinder not included: Accepts Lockwood 570 Series oval cylinder (32mm H x 18mm W) - order separately to suit your key system.
- Fixing screws not supplied: The visible fixing screws for this interior plate must be ordered separately.
- Interior plate - pairs with 224 Series: This is the inside face plate with visible fixings. It must be paired with a 224 Series exterior plate (rectangular, concealed fixings). Fixing screws not included.
- Door thickness: 35-45mm as standard. For 45-55mm order SP2000-208 long fixing screws. Maximum 65mm with appropriate accessories.
- Non-returnable: Confirm finish and handing before ordering.
Lockwood Warranty (Australia)
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
Finish Warranty Guide:
- Stainless Steel: Up to 10 years
- 316 Marine Grade: Up to 10 years
Cosmetic finishes, batteries, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights under the Australian Consumer Law.
Lockwood offers a comprehensive range of plate door handle series to suit residential, commercial and institutional applications.
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
