Lockwood 214 Artefact Exterior Push/Pull Plate - Cylinder & Push Text Engraving | Satin Stainless Steel
The Lockwood 214 Series Artefact Exterior Push/Pull Plate with Cylinder and Push Text Engraving is a 300 x 100mm push/pull plate with 10mm radius corners, designed for exterior push/pull door applications. This plate features a Lockwood 570 Series oval cylinder hole for keyed exterior access, and an outlined "PUSH" text engraving (black gloss infill) to direct occupants. Cylinder not included.
The 214 Series plates are larger push/pull-style plates suited to commercial doors where a wide plate profile is required. Supplied in Satin Stainless Steel. Designed for use with Lockwood 3570 Series Mortice Locks.
Usually ships in 11 business days
Please confirm cylinder compatibility and suitability before ordering.
Available Finish Options
Satin Stainless Steel
SS
Fire Rated
- Fire rated up to 4 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Key Features
- Large push/pull plate - 300 x 100mm with 10mm radius corners - Lockwood 214 Series
- Cylinder hole (Function 00) with outlined PUSH text engraving (code F)
- Accepts Lockwood 570 Series oval cylinder - 32mm (H) x 18mm (W). Cylinder not included.
- "PUSH" outlined text engraving with black gloss infill
- Concealed fixings - studs located in each corner.
- Fire rated to 4 hours - AS1905.1:2005. Level D8 (500,000 cycles). 25-year mechanical warranty.
Suitable Uses
- Commercial exterior push doors requiring cylinder access and directional PUSH instruction
- Pairs back-to-back with 214 interior plate - exterior face of entry doors
- Applications where a larger plate profile is specified over the narrower 212 Series
Full Specifications
Helpful Tips
- Cylinder not included: This plate accepts a Lockwood 570 Series oval cylinder (32mm H x 18mm W) - order separately to suit your key system.
- 214 vs 212 Series: The 214 is a larger push/pull plate (300x100mm) compared to the 212 oval plate (162x50mm). Select based on door size and specification requirements.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 212/214 Series Handle Catalogue
Lockwood Push Pull Door Handles Catalogue
Lockwood offers a comprehensive range of plate door handle series to suit residential, commercial and institutional applications. The image below provides a visual overview of all available plate styles.
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
