Lockwood 200 Series Exterior Plate – Pull Outline & P1 Pull Handle
The Lockwood Artefact 200 Series exterior plate measures 162mm x 162mm and features square corners with concealed fixing. This configuration includes a pull outline with P1 pull handle.
Concealed fixed plates incorporate internal threaded studs at each corner. Plates are fixed back-to-back through the door when paired with the corresponding internal plate.
Estimated Warehouse Dispatch: 11 Days
Key Features
- 162mm x 162mm square corner exterior plate.
- Pull outline configuration with P1 pull handle.
- Concealed fixing design.
- Suitable for Lockwood 3770 Selector and 3570 Synergy mortice locks and push/pull applications.
- Designed, assembled and customised in Australia.
Fire Rated
- Successfully tested up to 4 hours when installed with an approved Lockwood mortice lock.
- Tested in accordance with AS1905.1:2005 – Fire Resistant Doorsets.
- Fire performance dependent on the complete door assembly.
Specifications
- Series: 200 Series Artefact
- Plate Size: 162mm x 162mm
- Plate Thickness: 2mm stainless
- Function: Pull Handle Only (24)
- Door Thickness: 35–45mm standard
- Fixing: Concealed
- Handing: Left or Right
- Materials: Stainless Steel
Dimensions
Available Finish Options
Satin Stainless Steel
SS
Frequently Asked Questions
Does this configuration include a cylinder?
No. This is a pull handle only configuration with no cylinder preparation.
Is this plate fire rated?
Yes, when installed with an approved Lockwood mortice lock on a compliant fire door assembly.
Can this be paired with an internal plate?
Yes. It is designed to be fixed back-to-back with a compatible Artefact 200 internal plate.
Additional Information
Pull handle only configurations are typically specified for push/pull doors or fixed door applications where no latch operation is required from the exterior.
Warranty
- General Warranty: 25 years on mechanical parts and workmanship
- Keys: 12 months
- Finishes: Everbrass 25 yrs; Stainless/Chrome/Anodised 10 yrs; PVD incl. VIVID 10 yrs; Symmetry range 5 yrs; Decorative finishes (Bronze, Antique, Powdercoat) 2 yrs; natural brass ageing excluded
- Stainless Steel: Warranty excludes natural tea staining if not cleaned per care instructions
Download PDF Resources
|
Lockwood Plate Door Handles Catalogue |
|
Lockwood Warranty – 25 Year Mechanical Warranty |
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
