Ross Compact Electric Strike – Non-Monitored – ES53
Mortice lock compatibility: Not compatible with mortice locks due to latch bolt size. Designed to retrofit entrance set strike plates only.
Installation environment: Internal use only. Not suitable for gates or weather-exposed external installations.
The ROSSSTRIKE is a compact electric strike supplied in the ES53 non-monitored configuration. It is engineered to replace a standard entrance set strike plate, allowing retrofit installation with minimal frame modification while maintaining structural integrity. Its compact body suits narrow timber, steel, and aluminium door frames used in internal access control systems.
Key Features
- Compact electric strike sized to suit entrance set strike plates.
- Suitable for timber, steel, and aluminium door frames.
- Continuously rated solenoid for access control duty cycles.
- Australian designed compact strike format.
- Non-monitored configuration for basic access control systems.
Specifications
- Item Code: ROSSSTRIKE
- Model: ES53 (Non-Monitored)
- Locking Mode: Fail secure (power to open)
- Working Voltage: 12 volts DC
- Current Draw: Approximately 90 milliamps at 12 volts DC
- Frame Types: Timber, steel, aluminium
- Use Location: Internal only
- Wiring Note: Reverse polarity protection not built in. External diode protection required.
Dimensions
What's In The Box
- Ross compact electric strike ES53 (non-monitored)
Suitable Uses
- Internal access-controlled doors using entrance set style latches.
- Retrofit installations requiring minimal frame modification.
- Commercial and light industrial internal doors.
Download PDF Resources
|
Ross Compact Electric Strike Non-Monitored ES53 (PDF) |
Frequently Asked Questions
- Can this electric strike be used with mortice locks?
No. This model is designed for entrance set latches and is not compatible with mortice locks.
- Is this suitable for external gates?
No. The strike is intended for internal doors only and must not be exposed to weather.
- Does it require polarity protection?
Yes. External diode protection is required as reverse polarity protection is not built in.
Additional Information
- Correct latch alignment is critical. Excess latch preload can prevent consistent release.
- Compact body suits narrow frames where larger strikes cannot be installed.
- If monitored strike status is required, confirm availability and item codes before specifying.
Fail Safe and Fail Secure Reference
Technical Drawing
.
