Lockwood Induro 4-Point Hinged Door Mortice Locks — LW7230SS (+ Rods Kit)
The Lockwood Induro 4-Point Mortice Lock delivers higher security and better door sealing on hinged residential aluminium and large panel doors. A lift-bolt throws into the strike to compress the door for improved air/water performance, with optional shootbolts (rods kits) enabling true multi-point locking. The Induro range retains the Optimum installation footprint for straightforward retrofits.
Key Features
- Four locking points: latch + lift-bolt + top/bottom shootbolts (with rods kits).
- Lift-bolt compression improves sealing vs projection-bolt predecessors.
- Sequence-agnostic locking — can lock with or without shootbolts thrown.
- Reversible latch for field-selectable handing.
- Stainless steel faceplate; durable internal mechanism.
- Accepts 7.6 mm or 8 mm spindle; latch can be deadlocked by key.
- Backsets: 30 mm and 40 mm.
- Door thickness: 32–45 mm.
- Tested to AS4145.2 — Security S7 / Durability D7.
Operation & Lock Status
- Single-point (Latch): Handle-down retracts latch; door self-latches on close.
- 4-Point / Multi-point: Lift handle to throw lift-bolt and (if fitted) shootbolts; handle-down retracts all.
- Passage: Free access both sides.
- Safety: Snib from inside; key required from outside.
- Secure: Locked both sides; key required either side.
Specifications
- Item Code Family: LW72 Series
- Backsets: 30 mm (short or long throw), 40 mm (short throw)
- Deadbolt projection: Short 13 mm (30/40 mm BS), Long 23 mm (30 mm BS only)
- Furniture: Suits Palladium & Palladium Xtra Snib long plates (Xtra required for snib-lock)
- Keying: 5-pin or 6-pin fixed cam Euro profile cylinders (ordered separately)
- Finish supplied: Brushed stainless steel faceplate
Estimated Warehouse Dispatch
3 Days
Item Code Family — Lockwood Induro 4-Point Mortice Locks
Accessories & Spares
Additional Information
- Retrofit notes: Same door-side footprint as Optimum; strikes/jamb cut-outs may differ due to lift-bolt vs projection-bolt.
- Furniture: Palladium Xtra Snib required to use the snib-lock function.
- Shootbolts: Use rods kits (LW7230S/A10 or LW7240S/A10) or order P33096/P84017 as needed.
- Strikes: Select strike kits to tune seal compression and performance; strike plates are not included with the lock pack.
- Keying: Suits 5-pin/6-pin fixed cam Euro cylinders (ordered separately).
Warranty
- General Warranty: 25 years on mechanical parts and workmanship
- Electrical/Electronic Components: 3 years (excludes PADDE, electric mortice locks & batteries)
- PADDE & Electric Mortice Locks: 5 years
- Keys: 12 months
- Finishes: Everbrass 25 yrs; Stainless/Chrome/Anodised 10 yrs; PVD incl. VIVID 10 yrs; Symmetry 5 yrs; Decorative finishes 2 yrs; natural brass ageing excluded
- Stainless Steel Care: Warranty excludes tea staining if not maintained per care instructions
Download PDF Resources
|
Lockwood 25 Year Mechanical Warranty (Conditions Apply) |
|
Lockwood Euro Profile Mortice & Twin Bolt Locks — Catalogue |
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
