Dorma Closer Body Only TS93G EN5-7 (Push Side) - Silver
The Dorma TS93G is a cam action door closer body from the modular TS93 system, using a heart-shaped cam profile suited to a range of door designs and fixing positions. This is the special model for push side door leaf fixing or pull side transom fixing, commonly used where the closer needs to be installed in a push side orientation.
This listing is supplied as the closer body only. Arm assemblies, slide channels, and mounting accessories are selected separately to suit the installation.
Key Features
- Cam action closer body with heart-shaped cam mechanism.
- Adjustable closing force via adjustment screw (EN 5–7).
- Valve-adjustable closing speed and latching speed.
- Backcheck and delayed action adjustable at the valve.
- Non-handed design suitable for left or right hand doors.
- Modular TS93 system allows tailored arm and channel selection.
Fire Rated
- Suitable for use on fire and smoke check doors when installed in an approved configuration.
- Where a cushioned limit stay is required for the door design, it must be selected as part of the overall compliant assembly.
- Compatibility must be verified for the specific door, arm or slide channel, and installation method.
Specifications
- Item Code: DOTS93G57SIL
- Product Type: Door closer body only
- Closer Model: Dorma TS93G
- Spring Strength: EN 5–7 (adjustable)
- Installation: Push side door leaf fixing or pull side transom fixing
- Maximum Door Width: Up to 1600 mm (application dependent)
- Standards: Tested to EN 1154
- Finish: Silver
What's In The Box
- 1 × Dorma TS93G door closer body
Suitable Uses
- Single and double doors requiring higher closing force adjustment.
- Commercial and institutional doors where controlled closing is required.
- Fire and smoke check doors when installed in a compliant configuration.
Dimensions
| Dimension | Size |
|---|---|
| Length | 285 mm |
| Width | 62 mm |
| Height | 71 mm |
| Weight | 5.2 kg |
Frequently Asked Questions
- Is this supplied with an arm or slide channel?
No. This listing is for the door closer body only. Arm assemblies and slide channels are selected separately. - Is this suitable for fire doors?
Yes, when installed using approved components and in a tested fire door configuration. - How do I choose between EN 5 and EN 7 settings?
The closing force is adjusted to suit the door size, weight, and site conditions. For heavier or wider doors, the closer is commonly set toward the higher end of the adjustment range.
Additional Information
- The TS93G is commonly specified where door geometry or fixing constraints require push side leaf mounting.
- Correct selection of arms and channels is critical to achieve stable closing and latching performance.
- For doors exposed to wind or high air pressure, installers typically allow extra margin in closing force and verify latch performance on site.
