The RLB1-DPDT -V2 is a 12VDC/ 24VDC dual buffered input PCB mounted relay.
Program input voltage 12VDC or 24VDC to the nominated terminals observing correct polarity.
The relay can be triggered on either + or - trigger input terminal. Applying a positive voltage between 5V to 27V or 0V to the respective terminals will activate the relay and will deactivate upon removal of the trigger voltage.
Triggered input will be indicated by the on-board red LED. The relay is fitted with two x DPDT relay contacts NC,C,NO which have a contact rating of 1A at 30VDC.
Each set of contacts can be configured via jumper header to be voltage free, positive or 0 Volts on the common terminal, 50mA maximum can be supplied when using contact headers, if higher current is required connect the required voltage to the common of the relay contact.
- Input Voltage: Jumper selectable 11DC to 27VDC.
- Current Draw: Input dependant 47mA at 12V when relay is activated.
- Output Channels: 2.
- Contact rating: 1A at 30VDC per set of contacts.
- Status Indication: Red LED illuminated when relay is triggered.
- Dimensions: 32 (L) x 42 (W) x 19 mm (H).
