Tactical 16vac 1.5amp Plug Pack
The Tactical TP16500A is a 16 Volt Alternating Current plug pack designed for indoor Information Technology Equipment use. It converts 230 to 240 Volt 50 Hertz mains to a 16 Volt Alternating Current output rated at 1.5 Amp continuous, and includes a 1.7 metre three core lead with earth.
Key Features
- 16 Volt Alternating Current plug pack rated at 1.5 Amp continuous output.
- 1.7 metre black three core output cable including earth connection.
- Designed to operate from 0 to 40 degrees Celsius at full output using convection cooling.
- Internal thermal fuse overload protection.
- Approved to relevant AS/NZS electrical safety standards and Minimum Energy Performance Standards requirements.
Specifications
- Item Code: TP16500A
- Input Voltage: 230 to 240 Volt, 50 Hertz
- Input Current: 0.3 Amp
- Output Voltage: 16 Volt Alternating Current nominal
- Output Current: 1.5 Amp continuous
- Output Cable: 1.7 metre black three core cable (includes earth)
- Overload Protection: Internal thermal fuse
- Working Temperature: 0 to 40 degrees Celsius
- Efficiency: Minimum Energy Performance Standards Efficiency Level III
- Electrical Safety: AS/NZS 62368.1:2018 and AS/NZS 3112
- Minimum Energy Performance Standards Registration: AS/NZS 4665.1 and AS/NZS 4665.2 (APS9429)
- Compliance Certificate: GMA-509685-EA
- Country of Origin: Made in China
- Warranty: 3 years
- Suits: PS131A
What's In The Box
- Tactical TP16500A 16 Volt Alternating Current 1.5 Amp plug pack.
- Integrated 1.7 metre three core lead with earth connection.
Suitable Uses
- Power supply for equipment requiring 16 Volt Alternating Current at up to 1.5 Amp continuous.
- Indoor power source for Information Technology Equipment applications.
- Replacement or service plug pack for compatible Tactical and third party devices where 16 Volt Alternating Current is specified.
Dimensions
Download PDF Resources
|
TP16500A Specifications Sheet (GMA-509685-EA) |
Frequently Asked Questions
- Is this Direct Current or Alternating Current output?
This model provides a 16 Volt Alternating Current output (not Direct Current). - Can this run continuously at full load?
Yes. It is specified for 1.5 Amp continuous output within a 0 to 40 degrees Celsius working temperature range. - Is this suitable for outdoor installation?
No. The specifications sheet states it is designed for indoor use only.
Additional Information
- When replacing an existing supply, confirm the connected device specifically requires 16 Volt Alternating Current. Substituting a Direct Current adaptor is a common cause of faults and nuisance resets.
- Allow airflow around the plug pack body so convection cooling can work as intended, especially if mounted inside a tight cabinet or power board cluster.
- If a site experiences repeated overload events, check downstream wiring and device current draw rather than fitting a higher rated supply without confirming the device specification.
