Salto Outdoor Gasket Kit for Narrow XS4 Original and XS4 Original+ Euro
The Salto SP226849 is an outdoor gasket kit for XS4 Original and XS4 Original+ narrow Euro style escutcheons. When correctly installed, it helps improve the tightness of the escutcheon at the door face for protected outdoor use.
Key Features
- Outdoor gasket kit for XS4 Original and XS4 Original+ narrow Euro escutcheons.
- Installation guide notes correct mounting improves escutcheon tightness.
- Includes multiple gasket types for escutcheon and through-door sealing points.
- Door thickness allowance increases by approximately +2 mm when fitted.
Specifications
What's In The Box
- Gasket set as shown in the Salto installation guide.
- Guide indicates kit quantities: 6 x escutcheon gaskets, 12 x round gaskets, 8 mm square spindle gaskets (x6), and 9 mm square spindle gaskets (x6).
Suitable Uses
- Upgrading escutcheon sealing on XS4 narrow Euro escutcheons in protected outdoor locations.
- Replacing missing, compressed, or damaged gaskets on existing XS4 installations.
- Installations where improved escutcheon tightness is required around the door face.
Dimensions
Salto Outdoor Gaskets Kit for XS4 Original and XS4 Original+ - Item Code Family
Download PDF Resources
|
Installation Guide - Outdoor Gaskets Kit for XS4 Original and XS4 Original+ |
Frequently Asked Questions
- Is this kit suitable for XS4 narrow Euro escutcheons?
It is intended for XS4 Original and XS4 Original+ narrow Euro configurations (as described in the installation guide). - Will this change door thickness requirements?
Yes. The installation guide indicates the gasket stack up adds approximately +2 mm, so allow for this when checking through-door hardware lengths. - Does this kit include the escutcheon or lock?
No. This is a gasket kit only. The escutcheon and lock components are supplied separately.
Additional Information
- Clean the door face and escutcheon mating surfaces before fitting so the gasket can seat flat without debris or wrinkles.
- Over-tightening escutcheon fixings can deform gaskets, which can reduce sealing and make alignment harder on retrofit work.
- After fitting, re-check spindle and through-door clearances because the added gasket thickness can slightly change fit-up.
