Risco Wireless Panda Keypad with Inbuilt Proximity Reader - Suits LightSYS+ - White
Key Features
- Two way wireless keypad for LightSYS+ systems.
- Integrated proximity reader for credential based arming and disarming.
- Fully wireless installation with no bus wiring required.
- Simulates a wired keypad bus connection for full programming capability.
- Real time status indications, alarms and trouble notifications.
- Remote firmware upgrade capability through the system.
- Sleek, modern design suitable for contemporary interiors.
- Flush mount accessory available for discreet installation.
Specifications
- Item Code: RW432KPP402A
- Product Type: Wireless keypad with proximity reader
- Wireless Communication: Bi-directional
- System Compatibility: LightSYS+ systems only
- Wireless Frequency: 433.92 megahertz
- Proximity Frequency: 13.56 megahertz
- Power Supply: 4 × CR123 3 volt lithium batteries
- Typical Battery Life: 3 years
- Standby Current: 9 microamps
- Maximum Current: 150 milliamps
- Operating Temperature: -10°C to 55°C
- Storage Temperature: -20°C to 70°C
- Finish: White
What's In The Box
- Risco wireless Panda keypad with proximity reader
- Mounting bracket
- 4 × CR123 lithium batteries
- Installation instructions
Suitable Uses
- Wireless LightSYS+ alarm installations.
- Retrofit installations where wiring is difficult or undesirable.
- Residential or small commercial security systems.
- Entry and exit control using proximity credentials.
Dimensions
| Height | Width | Depth |
|---|---|---|
| 178 mm | 103 mm | 38 mm |
PDF Resources
|
Risco Panda Wireless Keypad Release Notes |
|
Flush Mount Bracket Installation Instructions |
Frequently Asked Questions
- Can this keypad be used with LightSYS2?
No. This model is designed for LightSYS+ systems only. - Does it require wiring to the control panel?
No. It communicates wirelessly with the panel using two way wireless communication. - What is required for wireless communication?
A compatible wireless video module receiver is required for operation.
Additional Information
- Wireless keypads are commonly used in retrofit installations where cabling is impractical.
- Two way wireless communication allows the keypad to receive real time status updates from the panel.
- Flush mounting accessories are available where a lower profile installation is required.
