Risco Wired Grade 3 Curtain Dual Tech Outdoor Detector – 12m Range – White
Key Features
- Grade 3 outdoor curtain detector designed for perimeter protection.
- Dual technology detection combining Passive Infrared sensor and K-Band microwave.
- Narrow curtain beam reduces false alarms from adjacent areas.
- Active infrared anti-mask protection.
- Direct sunlight immunity for stable outdoor operation.
- Supports relay output and Risco bus connectivity.
- Adjustable sensitivity with four selectable levels.
- Includes mounting bracket for left or right side installation.
Specifications
- Item Code: RK107DTB000A
- Brand: Risco
- Detector Type: Dual technology outdoor curtain detector
- Detection Technologies: Passive Infrared and K-Band microwave
- Coverage Range: Up to 12 metres
- Beam Angle: 5 degrees
- Beam Width: Approximately 1 metre at 12 metres
- Mounting Height: 1.8 to 3.0 metres
- Connection Options: Relay output or Risco bus
- Anti-Mask: Active infrared
- Tamper Protection: Wall tamper
- Operating Temperature: -20 to 60 degrees Celsius
- Environmental Rating: IP65
- RF Immunity: 10 megahertz to 3 gigahertz to EN50130-4
- Finish: White
What's In The Box
- Risco wired outdoor dual technology curtain detector
- Mounting bracket
- Standard mounting hardware
Suitable Uses
- Outdoor perimeter protection along walls and fences.
- Monitoring windows, doors, and narrow access paths.
- Commercial and industrial alarm installations requiring Grade 3 devices.
- Residential properties needing focused outdoor detection with minimal false alarms.
Dimensions
Download PDF Resources
- Wired Outdoor DT Curtain Detector Installation Manual
- Outdoor Curtain Detector Line Brochure
- Curtain Outdoor Swivel Bracket Installation Manual
Frequently Asked Questions
- Is this detector suitable for outdoor installation?
Yes. It is IP65 rated and designed specifically for outdoor perimeter protection. - What makes a curtain detector different from a standard PIR?
Curtain detectors create a narrow detection field, making them suitable for walls, windows, and narrow passages rather than open areas. - Can this be connected to non-Risco alarm panels?
Yes. The relay output allows connection to conventional alarm panels, while Risco bus mode is used with compatible Risco systems.
Additional Information
- This detector is commonly installed to create a virtual curtain along external walls and openings.
- The narrow beam design helps minimise nuisance alarms caused by movement outside the intended detection zone.
- Grade 3 classification aligns with higher security commercial and industrial installations.
- Correct alignment during installation is essential to achieve the specified 12 metre curtain coverage.
