Risco Shocktec Grade 2 Vibration Detector - White

ShockTec� is a digital shock detector providing reliable 24-hour perimeter protection. A break-in is detected as soon as the intruder attempts to force, smash, drill or even saw through the protected window, door, wall or roof.

ShockTec� employs an advanced digital microprocessor to analyse the vibration signal received from the piezo electric sensor.

A unique feature of ShockTec� 600S is its digital sampling of the signal simultaneously in two separate channels, each channel amplified at a different gain. This provides an extremely wide dynamic range of the sampled signal, enabling precise measurement and analysis of the shock signal.

• Digital Microprocessor with Intelligent Digital Signal Processing.
• Gross Attack detection.
• Intelligent Digital Signal processing - differentiates between naturally caused vibrations and cuts out frequencies that cannot be caused by an illegal entry attempt.
• Ideal for windows, doors, walls and roofs.
• Encapsulated bi-morph piezo electric sensor.
• Supply voltage: 9V-16V DC.
• Current consumption (typical): 12.5mA.
• Operational temperature: -20�C to 60�C.
• Maximum humidity: 95% non-condensing.
• Sensitivity setting: Dual stage potentiometer.
• Tri-colour LED indicator: Orange-over-sensitive, green: alarm & correct calibration, red: under-sensitive.
• Contact ratings:
  Alarm relay: 100mA at 24VDC, NC,
  Tamper relay: 500mA at 24VDC, NC.
• Alarm Time: 2.5 seconds.
• Latching modes: Any or first to latch operation modes.
• Max No. of units on Any Latch loop: 80.
• Max No of units on 1st to Latch loop: 10
• False alarm protection: Digital microprocessor signal processing and noise reduction with maximum ground plane.
• Electrostatic discharge: No false alarms up to 8kV.
• RF immunity: 40 V/m from 80MHz to 1GHz.
• Enclosure material: Flame retardant ABS.
• Enclosure dimensions: 25 x 28 x 95 mm.