Risco RisControl Z-Wave Controller 5VDC 1.5A USB-C Power Supply
The Risco RisControl power supply provides 5 Volt Direct Current output via a USB-C connection for powering the RisControl Z-Wave controller. It allows the controller to operate in standalone mode when used with a compatible mains outlet.
Key Features
- 5 Volt Direct Current power supply for Risco RisControl Z-Wave controller.
- 1.5 Amp output for stable controller operation.
- USB-C connection for direct compatibility with the controller.
- Enables standalone operation of the RisControl unit.
Specifications
- Item Code: RP432PSRC00A
- Product Type: USB-C power supply
- Compatibility: Risco RisControl Z-Wave controller
- Input Voltage: 230 Volt alternating current
- Output Voltage: 5 Volt direct current
- Output Current: 1.5 Amp
- Connector Type: USB-C
What's In The Box
- 1 × Risco RisControl 5VDC 1.5A USB-C power supply
Suitable Uses
- Powering the Risco RisControl Z-Wave controller in standalone installations.
- Replacement power supply for existing RisControl units.
- Installations requiring dedicated USB-C power for the controller.
Frequently Asked Questions
- Can this power supply be used with other devices?
It is designed for the Risco RisControl Z-Wave controller. Compatibility with other devices should be confirmed before use. - Does this allow the controller to operate without the alarm panel?
Yes. This power supply allows the RisControl unit to operate in standalone mode. - What happens if a lower-rated power supply is used?
Using a lower current power supply may result in unstable operation or the controller not powering up correctly.
Additional Information
- Standalone power supplies are commonly used when the RisControl unit is installed separately from the main alarm panel.
- Using the correct voltage and current rating helps prevent controller resets or communication faults.
- Installers typically position the power supply in a nearby mains outlet to maintain a stable connection.
