Risco RP432KPTZAUA RisControl 8 Inch Touchscreen Alarm and Smart Home Controller with Z-Wave
The Risco RisControl RP432KPTZAUA is an 8 inch touchscreen controller combining alarm control, smart home automation, video surveillance integration and Z-Wave gateway functionality in a single interface.
It operates as both a touchscreen keypad for compatible Risco security systems and as a Smart Home controller with integrated Z-Wave connectivity for automation and scene management.
Key Features
- 8 inch IPS capacitive touchscreen display.
- Integrated Z-Wave gateway operating at 921.4 MHz for Australia.
- Alarm control and touchscreen keypad functionality.
- Surveillance integration for cameras and network video recorders.
- Supports manual, scheduled and triggered automation rules.
- Event driven security zone rules controlling home automation devices.
- Up to four touchscreens per system: 1 master and 3 slave units.
- Cloud backup of settings, devices and automation rules.
- Over the air firmware updates.
- Grade 3 certified.
Specifications
- Item Code: RP432KPTZAUA
- Display Size: 8 inch IPS
- Resolution: 800 x 1280
- Touch Type: Capacitive, 5 point touch
- CPU: A83T Octa-Core Cortex A7
- Memory: 1 Gigabyte DDR3L
- Flash Storage: 8 Gigabyte EMMC
- Wi-Fi: 802.11 b/g/n 2.4 GHz
- Z-Wave Frequency: 921.4 MHz (Australia)
- System Interface: RS-485
- USB: Type C, USB 2.0 slave mode
- Operating Voltage: 13 Volt ±10 percent
- Typical Current: 200 milliampere
- Maximum Current: 300 milliampere
- Operating Temperature: -10 to 55 degrees Celsius
- Dimensions: 208 millimetre x 129 millimetre x 24 millimetre
- Weight: 481 gram
- Certification: EN50131-3 Grade 3 Environmental Class II PD6662:2017
What's In The Box
- 1 × RisControl 8 inch touchscreen controller
- Mounting bracket
- Installation instructions
Suitable Uses
- Residential and commercial alarm control installations.
- Smart home automation integration using Z-Wave devices.
- Sites requiring integrated video surveillance monitoring.
- Grade 3 certified alarm installations.
Dimensions
Download PDF Resources
Frequently Asked Questions
- Does this replace the main alarm panel?
No. It operates as a touchscreen keypad and smart home controller for compatible Risco alarm systems. - Is an additional Z-Wave gateway required?
No. Z-Wave gateway functionality is built into the device. - Can multiple screens be installed?
Yes. One master and up to three slave touchscreens can be used within a single system.
Additional Information
- Commonly specified in integrated alarm and home automation installations.
- Cloud backup ensures recovery of settings after hardware replacement.
- RS-485 wiring must follow correct BUS topology for reliable communication.
