Risco LightSYS+ Alarm Kit with 3 BWare Quad Detectors and Accessory Kit
The Risco RKLSP22A is a LightSYS+ alarm kit that bundles the LightSYS+ hybrid panel hardware with three BWare BUS quad passive infrared detectors and a set of signalling accessories. It is suited to sites that want BUS-connected Grade 3 motion detection and a scalable LightSYS+ platform.
LightSYS+ is positioned as Risco’s flagship hybrid alarm panel platform, designed to suit a wide range of installations from residential and small business sites through to larger commercial and higher security applications.
Key Features
- Alarm kit built around the LightSYS+ hybrid panel platform.
- Includes LightSYS+ control panel with inbuilt Internet Protocol and Wi-Fi connectivity.
- Includes 3 × BWare BUS Grade 3 quad PIR detectors with 15 metre detection range.
- BUS-connected detector format helps reduce home-run wiring compared to individual zone cabling.
- Includes small plastic enclosure with tamper.
- Includes 14.4 volt direct current 2.5 amp power supply and Australian kettle cord.
- Includes Neptune outdoor siren and strobe plus a Neptune top hat piezo screamer.
- Includes 12 volt 7 amp hour backup battery.
Specifications
- Item Code: RKLSP22A
- Kit Type: Alarm kit with BUS detectors and accessory kit
- Panel: LightSYS+ control panel with inbuilt Internet Protocol and Wi-Fi (RP432MP0000A)
- Included Detectors: BWare BUS Grade 3 quad passive infrared detector, 15 metre range (RK500Q0G300A)
- Power Supply: 14.4 volt direct current 2.5 amp (RP432PS25NCA)
- Backup Battery: 12 volt 7 amp hour valve regulated lead-acid battery (item code not specified in provided material)
What's In The Box
- 1 × Risco LightSYS+ control panel with inbuilt Internet Protocol and Wi-Fi connectivity (RP432MP0000A)
- 1 × Risco LightSYS+ small plastic enclosure with tamper (RP432BP2000A)
- 3 × Risco BWare BUS Grade 3 quad PIR detector, 15 metre range (RK500Q0G300A)
- 1 × Risco 14.4 volt direct current 2.5 amp power supply, requires kettle cord (RP432PS25NCA)
- 1 × Risco 240 volt alternating current Australian kettle cord, White (1CB6154)
- 1 × Neptune outdoor slimline combo siren and strobe (NEPOSS)
- 1 × Neptune top hat piezo screamer (NEPTHS)
- 1 × 12 volt 7 amp hour valve regulated lead-acid battery (NEP12V7AH)
Suitable Uses
- Installations needing BUS-connected Grade 3 motion detection on the LightSYS+ platform.
- Sites where you want to expand the system without running separate cables back to the panel for every detector.
- Small to medium commercial sites wanting higher grade motion detection and external signalling included.
- Residential installs where wiring pathways allow BUS detector placement and you want reduced battery maintenance compared to wireless sensors.
LightSYS+ Alarm Kit Components – Item Code Family
Download PDF Resources
Frequently Asked Questions
- Are the included detectors wired or wireless?
The included BWare detectors are BUS-connected wired devices in this kit configuration. - What is the benefit of BUS detectors compared to standard zone wiring?
BUS devices can reduce individual home-run cabling and allow multiple devices to be installed along a shared BUS run, depending on system design. - Does this kit include external signalling?
Yes. It includes an outdoor slimline siren and strobe (NEPOSS) plus a top hat piezo screamer (NEPTHS).
Additional Information
- BUS detector layout should be planned early so cable routing, terminations, and addressing can be completed cleanly before final commissioning.
- Quad PIRs are typically used where you want more stable detection patterns across larger areas, but correct mounting height and aiming remain critical to avoid nuisance alarms.
- In commercial sites, consider separating high traffic areas onto appropriate arming modes so detectors do not generate unnecessary alarms during partial set operations.
Technical Drawing
