Risco LightSYS+ Alarm Kit with 3 BWare BUS Quad Detectors and Accessory Kit
The Risco RKLSP18A is a wired LightSYS+ alarm kit that bundles the LightSYS+ hybrid panel platform with three BWare BUS Grade 3 quad passive infrared detectors and a set of external signalling accessories. It is suited to installations that want BUS-connected Grade 3 motion detection with a scalable LightSYS+ platform.
LightSYS+ is Risco’s flagship hybrid alarm panel platform, designed to protect a wide range of installations from residential and small business sites through to larger commercial and high security applications.
Key Features
- Wired LightSYS+ alarm kit with BUS-connected Grade 3 motion detection.
- Includes 3 × BWare BUS Grade 3 quad PIR detectors with 15 metre range.
- Control panel includes inbuilt Internet Protocol and Wi-Fi connectivity.
- Includes small plastic enclosure with tamper protection.
- Includes 14.4 volt direct current 2.5 amp power supply and Australian kettle cord.
- Includes Neptune outdoor slimline siren and strobe plus Neptune top hat piezo screamer.
- Includes 12 volt 7 amp hour backup battery.
Specifications
- Item Code: RKLSP18A
- Kit Type: Wired alarm kit
- Sensors Included: 3
- Pet Friendly Kit: No
- Included Motion Detectors: BWare BUS Grade 3 quad PIR, 15 metre range (RK500QBG300A)
- Panel: LightSYS+ control panel with inbuilt Internet Protocol and Wi-Fi (RP432MP0000A)
What's In The Box
- 1 × Risco LightSYS+ control panel with inbuilt Internet Protocol and Wi-Fi (RP432MP0000A)
- 1 × Risco LightSYS+ small plastic enclosure with tamper (RP432BP2000A)
- 3 × Risco BWare BUS Grade 3 quad PIR detector, 15 metre range (RK500QBG300A)
- 1 × Risco 14.4 volt direct current 2.5 amp power supply (RP432PS25NCA)
- 1 × Risco 240 volt alternating current Australian kettle cord, White (1CB6154)
- 1 × Neptune outdoor slimline combo siren and strobe (NEPOSS)
- 1 × Neptune top hat piezo screamer (NEPTHS)
- 1 × 12 volt 7 amp hour valve regulated lead-acid battery (NEP12V7AH)
Suitable Uses
- Commercial and higher security installations needing BUS-connected Grade 3 PIR detection.
- Sites where shared BUS cabling is preferred over separate zone home-run wiring.
- Installations requiring outdoor siren and strobe signalling plus an internal piezo screamer.
- Projects planning future LightSYS+ expansion with additional wired or wireless peripherals.
LightSYS+ Alarm Kit Components – Item Code Family
Download PDF Resources
Frequently Asked Questions
- Are the included detectors wired or wireless?
The included BWare detectors are BUS-connected wired devices in this kit configuration. - Does this kit include outdoor signalling?
Yes. It includes an outdoor siren and strobe (NEPOSS) plus a top hat piezo screamer (NEPTHS). - Is this kit pet friendly?
No. This kit is not classified as pet friendly.
Additional Information
- BUS detector layout should be planned early so cable routing, addressing, and terminations can be completed cleanly before commissioning.
- For best results, quad PIR placement should avoid direct sunlight, heaters, and strong draughts that can contribute to nuisance alarms.
- External sirens are typically mounted high and out of reach, with sound projection considered to avoid eaves and corners that can block output.
Technical Drawing
