Lockwood Velocity® VEL2/L4 — Privacy Set, 63 mm Round Rose with L4 Lever
The Lockwood Velocity® VEL2/L4 is a privacy set on a 63 mm round rose, paired with the L4 (Glide) lever. Featuring zinc die-cast construction, concealed fixings, and the Align → Twist → Tighten installation system, it provides durability and clean styling. Privacy sets include an inside snib and outside emergency release, making them ideal for bathrooms and toilets.
Estimated Warehouse Dispatch: 2 Days
Key Features
- Function: Privacy set — with internal snib and emergency release, ideal for bathrooms and toilets.
- Lever: Glide® L4 — 121 mm length, 56.5 mm projection, 33.5 mm clearance.
- Rose: 63 mm round × 12.5 mm thick, concealed fixing.
- Door Prep: Suits 50 mm or 54 mm holes; door thickness 32–45 mm.
- Construction: Solid zinc die-cast with concealed fixings.
- Install: Pre-assembled lever sets with twist-and-tighten fixing for quick installation.
- Backset: Supplied with 60 mm privacy tubular latch.
Standards & Compliance
- D8 Durability — 500,000 cycles (AS4145.2:2008).
- C10 Corrosion Resistance — Satin Chrome finish tested to 1,000 hrs (AS4145.2:2008).
Available Finish Options — VEL2/L4
Chrome Plate
VEL2/L4CP
Satin Chrome
VEL2/L4SC
Satin Pearl
VEL2/L4SP
Matt Black
VEL2/L4MBK
Item Code Family — Velocity Large Rose (63 mm) with L4 Lever
Accessories & Spares
Suitable Uses
- Bathrooms and toilets (Privacy set, with internal snib and emergency release).
- Wardrobe and cupboard doors (Dummy Half set variant).
- Internal connecting doors in residential settings (Passage set variant).
- Ideal for consistent styling alongside Lockwood Nexion®, Palladium®, and Paradigm® ranges.
Warranty
- General Warranty: 25 years on mechanical parts and workmanship
- Electrical/Electronic Components: 3 years (excludes PADDE, electric mortice locks & batteries)
- PADDE & Electric Mortice Locks: 5 years
- Keys: 12 months
- Finishes: Everbrass 25 yrs; Stainless/Chrome/Anodised 10 yrs; PVD incl. VIVID 10 yrs; Symmetry range 5 yrs; Decorative finishes (Bronze, Antique, Powdercoat) 2 yrs; natural brass ageing excluded
- Stainless Steel: Warranty excludes natural tea staining if not cleaned per care instructions
Download PDF Resources
|
Lockwood 25 Year Mechanical Warranty (Conditions Apply) |
|
Lockwood Rose Door Handles Catalogue |
|
Lockwood Velocity Series – Small Rose Door Handles |
Additional Information
- The 63 mm rose is retrofit-friendly and helps conceal paint lines from previous hardware.
- Square rose styling is available via trim packs (see Accessories & Spares).
- Glide® L4 lever coordinates with Lockwood Nexion®, Palladium®, and Paradigm® ranges for a cohesive look.
- Supplied with a 60 mm privacy latch and external emergency release as standard for VEL2 sets.
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
