Powerbox 13.8VDC 10amp Power Supply Kit with Battery Charging - Black
The Powerbox PBB2561210KIT is a wall mounted DC power supply kit providing a regulated 13.8VDC output with battery backup capability. Designed for security, access control, and communication systems, it delivers uninterrupted DC power during mains failure when connected to a suitable lead-acid battery.
Key Features
- 13.8VDC regulated output power supply.
- 10 amp output capacity.
- Battery backup capability for uninterrupted DC power.
- AC fail and low battery monitoring alarms.
- Two-step current limited float charger.
- Battery low voltage disconnect protection.
- Converter ON/OK alarm indication.
- High efficiency, low output noise design.
- Wall mount vented metal enclosure.
- Tamper switch included.
- Accepts batteries from 7 amp hour to 17 amp hour.
Specifications
- Item Code: PBB2561210KIT
- Brand: Powerbox
- Output Voltage: 13.8 VDC
- Output Current: 10 A
- Power Rating: Approximately 138 W
- Input Voltage: 220 to 240 VAC mains
- Battery Backup: Yes
- Battery Type: Lead-acid (not included)
- Battery Capacity: 7 Ah to 17 Ah
- Monitoring: AC fail and low battery alarms
- Cooling: Natural convection
- Enclosure Type: Wall mount metal cabinet
- Tamper Switch: Yes
- Finish: Black
What's In The Box
- 1 × 13.8VDC 10A power supply unit
- 1 × Wall mount metal enclosure
- Power supply mounting brackets
- Tamper switch
- Fixing hardware
Suitable Uses
- Access control systems.
- Security and alarm panels.
- Communication equipment.
- Control systems requiring DC backup power.
Dimensions
| Measurement | Size |
|---|---|
| Width | 325 mm |
| Height | 305 mm |
| Depth | 105 mm |
Frequently Asked Questions
- Does this kit include a backup battery?
No. The battery must be supplied separately. The enclosure accepts lead-acid batteries from 7 Ah to 17 Ah. - What happens during a mains power failure?
When connected to a suitable battery, the unit automatically supplies DC power from the battery to keep the load operating. - Is this suitable for access control systems?
Yes. It is commonly used to power access control, alarm, and communication equipment requiring a 13.8VDC supply with backup.
Additional Information
- Commonly installed in access control cabinets to power electric locks, readers, and controllers.
- Battery backup allows continued operation during mains outages.
- Installers should size the battery capacity based on required standby time and connected load.
