Lockwood Paradigm® Satin Stainess Steel 005 Pull Handle Lockset — Double Cylinder Deadbolt (005/DPHB)
Premium entrance solution combining a long pull handle set with the proven Paradigm® 005 deadbolt. Features LockAlert®, SafetyRelease™, and DualSelect® for secure/safety/passage modes, with concealed fixings for a clean, contemporary façade.
Estimated Warehouse Dispatch: 2 Days
Key Features
- Three operating modes with LockAlert® status indicator: Safety, Secure, Passage.
- SafetyRelease™ unlocks internal turn when a key is used from the outside.
- DualSelect® lets you select Secure mode with an extra key turn.
- Counterbalance stainless bolt, Kinetic Defence® bump/pick resistance, and anti-corrosion testing.
- Concealed screw fixings; pairs with interior levers for a consistent look throughout the home.
Specifications
- Series / Item: 005 Paradigm — Pull Handle Lockset (Deadbolt)
- Backset: 60–70 mm adjustable
- Door Thickness: 32–48 mm (32–36 mm spacer included)
- Handles: Exterior 600 mm, Interior 500 mm; width 30 mm
- Bolt: High security cut-resistant stainless steel; counterbalance design
- Keying: LW4 5-pin cylinder, 2 keys included (key blank KB401B5P)
- Materials: SSS variant features 304 grade satin stainless pull handles; MBK is Nero finish
- Corrosion: Neutral salt spray tested (AS2332.3.1)
- Includes door magnets to hold door in position in passage mode
- Security rating: AS4145.2-2008 SL8 D8 C6 K5
What's In The Box
- External pull handle (600 mm) + internal pull handle (500 mm)
- Paradigm 005 deadbolt lock body & adjustable 60–70 mm bolt
- Strike box & strike plate; fixing kit with concealed screws
- Magnetic door catch kit (for passage mode)
- Spacer ring for 32–36 mm doors
- 2 × keys (individually keyed)
- Installation instructions
Suitable Uses
- Residential front entries and statement doors needing a long pull handle + high-security deadbolt.
Available Finish Options — 005/DPHB••
Matt Black
005/DPHBMBK
Satin Stainless Steel
005/DPHBSSS
005/DPHB — Pull Handle Lockset (Deadbolt) — Variants
Accessories & Spares
Warranty
- General Warranty: 25 years on mechanical parts and workmanship
- Electrical/Electronic Components: 3 years (excludes PADDE, electric mortice locks & batteries). Batteries not covered
- PADDE & Electric Mortice Locks: 5 years
- Keys: 12 months
- Finishes: Everbrass 25 yrs; Stainless/Chrome/Anodised 10 yrs; PVD incl. VIVID 10 yrs; Symmetry range 5 yrs; Decorative finishes (Bronze, Antique, Powdercoat) 2 yrs; natural brass ageing excluded
- Stainless Steel: Warranty excludes natural tea staining if not cleaned per care instructions
Download PDF Resources
|
Lockwood 25 Year Mechanical Warranty (Conditions Apply) |
|
Paradigm Pull Handle Deadbolt — Installation Instructions |
|
Lockwood Push/Pull Door Handles Catalogue |
Additional Information
- Door magnets included to hold door when set to Passage mode.
- Installation drilling template provided in the instructions PDF.
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
