Neptune Standalone/Wiegand Capacitive Touch Mullion Keypad with HID, EM and Mifare Reader - IP65
The Neptune NEKPWST2S is a slimline IP65 rated mullion keypad with a capacitive touch interface and reinforced, high strength, wear-resistant glass panel. With an onboard dual-band reader, it supports 125 kilohertz EM and HID credentials and 13.56 megahertz Mifare credentials (including Central Processing Unit and Near Field Communication types that use International Organization for Standardization 14443A). It can be configured as a reader or a single door controller for domestic and commercial access control.
Key Features
- Slimline mullion format for narrow frames and door jamb mounting.
- Capacitive touch keypad with reinforced glass panel for a sealed, easy-clean front face.
- Integrated reader supports EM and HID 125 kilohertz cards and fobs, plus 13.56 megahertz Mifare credentials.
- Selectable keypad backlight modes: Normal on, Normal off, or Automatic.
- Can be used as a standalone controller or as a Wiegand reader output device.
- Zinc alloy case suited to domestic and commercial installations.
Specifications
- Item Code: NEKPWST2S
- Keypad Type: Capacitive touch
- Keypad Layout: 2 x 6
- Standalone Operation: Yes
- User Capacity: 2000
- Power Input: 12 volts direct current to 24 volts direct current
- Idle Current: 50 milliamps or less
- Integrated Reader: Dual-band
- Credential Support: 125 kilohertz EM and HID; 13.56 megahertz Mifare, Central Processing Unit and Near Field Communication (International Organization for Standardization 14443A)
- Read Range: 125 kilohertz - 5 centimetres or less; 13.56 megahertz - 2 centimetres or less
- Wiegand Output: Yes (Wiegand 26 to 37 bit; HID card output Wiegand 26 to 37 automatically)
- Keypad Output Format: 4 bit, 8 bit, virtual card
- Ingress Protection: IP65
- Anti-tamper: Yes
- Manager Add/Delete: Yes
- Operating Temperature: -40 degrees Celsius to 60 degrees Celsius
- Operating Humidity: 0 to 95 percent (non-condensing)
- Dimensions: 160 mm (H) x 45 mm (W) x 26 mm (D)
What's In The Box
- Neptune capacitive touch mullion keypad with integrated reader (NEKPWST2S)
- Mounting hardware (as shown in the reference diagrams)
Suitable Uses
- Single door access control where a slim mullion keypad is required on narrow frames.
- Sites using mixed credentials such as EM, HID and Mifare cards or fobs.
- Outdoor or exposed locations requiring IP65 ingress protection.
- Domestic and commercial entries needing either standalone keypad control or Wiegand output to a separate controller.
Dimensions
Neptune Standalone and Wiegand Capacitive Touch Keypads - Item Code Family
Download PDF Resources
|
Neptune NEKPWST2W and NEKPWST2S Complete Manual |
|
NEKPWST2S Quick Reference Guide |
Frequently Asked Questions
- Can this keypad work as a standalone controller without a separate access control panel?
Yes. It supports standalone operation and stores up to 2000 user codes. - What card and fob types does the built-in reader support?
It supports 125 kilohertz EM and HID credentials and 13.56 megahertz Mifare credentials. Read range depends on credential frequency and how the unit is mounted. - What is a common installation mistake to avoid?
Avoid placing the keypad wiring directly alongside high voltage cables, as electrical noise can affect reader performance. Keep separation and use correct cable routing to the controller.
Additional Information
- Mullion keypads are commonly selected where the mounting surface is narrow, such as aluminium shopfronts and door jambs.
- If using Wiegand output, confirm the bit format and wiring requirements at the access controller before final termination.
- Where multiple credential types are used on site, set consistent enrolment rules to prevent duplicate identifiers across different card formats.
Technical Drawing
.
