Neptune NEITB58W - Infrared Touchless Exit Button (Rectangle Case IP65)
The Neptune NEITB58W is an infrared touchless exit button supplied in a rectangle case for request-to-exit applications in access control systems. It uses an infrared sensor for touch-free activation and includes LED indication, adjustable detection range, and selectable momentary or toggle output modes.
Key Features
- Infrared touchless activation for hygiene focused sites and reduced wear.
- IP65 sealing protection for dust and water resistance.
- Adjustable detection range 4 to 15 cm.
- Selectable output state: trigger timer (0.5 to 30 seconds) or toggle mode.
- LED indication: default red (standby) and green (activation); LED colours can be reversed via jumper.
- NO NC COM relay output for flexible wiring to access controllers.
Specifications
- Item Code: NEITB58W
- Brand: Neptune
- Operation: Touchless (Infrared sensor)
- Finish: Black
- Ingress Protection: IP65
- Power Supply: 12 to 24 Volt Direct Current
- Current Consumption: Maximum 45 milliamp at 24 Volt Direct Current
- Relay Output Contact: Normally Open / Normally Closed / Common
- Output Loading: 1 Amp at 30 Volt Direct Current (maximum)
- Output State: Trigger timer 0.5 to 30 seconds, or toggle mode
- Detection Range: 4 to 15 cm (adjustable)
- LED Indicator: Yes (default red standby, green activation; reversible via jumper)
- Case Materials: Stainless Steel / Polycarbonate / Aluminium Alloy
- Button Diameter: 38 mm
- Operating Temperature: -10°C to 70°C
- Life: Infrared sensor 100,000 hours; relay mechanical lifespan 1,000,000 operations
- Weight: 270 g
- Text on Case: EXIT
What's In The Box
- 1 x Neptune NEITB58W infrared touchless exit button in rectangle case
Suitable Uses
- Request-to-exit points for access controlled doors.
- Healthcare, food handling, and public access areas where touch-free activation is preferred.
- Sites needing a boxed style exit button rather than a plate mounted format.
- Internal doors and sheltered external locations requiring an IP65 rated switch.
Dimensions
Neptune Infrared Touchless Exit Button Range - Item Code Family
Download PDF Resources
|
Neptune NEITB58W and NEITB98W Datasheet |
Frequently Asked Questions
- How close does a hand need to be to trigger the sensor?
The detection range is adjustable from 4 to 15 cm. Set it shorter if the button is installed in a busy corridor. - Can I wire this as Normally Closed or Normally Open?
Yes. The relay provides Normally Open, Normally Closed, and Common terminals. - What is a common installation mistake to avoid?
Mounting too close to reflective surfaces can cause unwanted triggers. After mounting, test the range and reduce the detection distance if required.
Additional Information
- Rectangle case format is often chosen where a surface mounted exit button is preferred instead of a faceplate style installation.
- Toggle mode can be useful for special applications, but most request-to-exit installations use a short trigger timer so the door relocks automatically.
- If installing in a busy walkway, reduce the detection range to minimise accidental activation.
Technical Drawing
