FSH FEM4300 280kg Single Maglock - Non-Monitored - 2 Hour Fire Rated - Satin Chrome
Key Features
- Single door electromagnetic lock with holding force up to 280 kilograms.
- Non-monitored configuration for straightforward access control systems.
- Dual voltage operation, field selectable between 12 Volt Direct Current and 24 Volt Direct Current.
- Built-in metal oxide varistor surge protection to help protect control electronics.
- Designed with no residual magnetism to reduce door binding after release.
- Successfully fire tested up to 2 hours on compliant fire door assemblies.
- Supplied with a 5 year mechanical warranty.
Fire Rated
- Successfully tested up to 2 hours on fire door assemblies in accordance with AS 1905.1, Part 1, Fire Resistant Doorsets.
- Fire rating is dependent on the complete door set configuration and compliant installation.
Specifications
- Item Code: FEM4300
- Brand: FSH
- Maglock Type: Single door electromagnetic lock
- Monitoring: Non-monitored
- Holding Strength: Up to 280 kilograms
- Working Voltage: 12 Volt or 24 Volt Direct Current (field selectable)
- Current Draw: 500 milliampere at 12 Volt Direct Current, 250 milliampere at 24 Volt Direct Current
- Finish: Satin Chrome
- Fire Rated: Yes, up to 2 hours
What's In The Box
- FSH FEM4300 electromagnetic lock body
- Matching armature plate
- Fixing hardware supplied with the maglock
Suitable Uses
- Commercial and industrial single door access control systems.
- Fire rated door assemblies where an electromagnetic locking solution is required.
- Internal doors requiring controlled entry with fail-safe unlocking on power loss.
Dimensions
Frequently Asked Questions
- Is this maglock suitable for fire doors?
Yes. This model has been successfully tested up to 2 hours on compliant fire door assemblies, subject to correct door set installation. - Does this maglock provide door status monitoring?
No. This is a non-monitored maglock and does not provide lock or door status outputs. - Can this be powered from either 12VDC or 24VDC?
Yes. The FEM4300 is field selectable for either 12 Volt or 24 Volt Direct Current operation.
Additional Information
- This maglock is commonly specified in Australian commercial buildings for fail-safe access control on single doors.
- Correct alignment between the magnet body and armature plate is critical to achieving full holding force.
- Installers should confirm fire door certification requirements before installation on rated door sets.
