Lockwood ES6000M-2 Hook Lock Mortice — 12–30 VDC Fail Secure Monitored
The Lockwood Padde Series ES6000 is a robust hook lock engineered for swing and sliding doors, with the capability to operate reliably under high pre-load conditions. The ES6000M-2 mortice variant provides Fail Secure operation with monitored outputs, delivering up to 300 kg pre-load capability, 680 kg static holding force, and multi-voltage 12–30 VDC input. Its stainless steel and aluminium construction ensures durability in demanding commercial environments.
Warranty
- 5 Year Tricare Warranty (Padde Series)
- Lockwood 25 Year Mechanical Warranty (Conditions Apply)
Key Features
- Mortice-mounted hook lock for swing or sliding doors
- Pre-load (side load) capable: operates under up to 300 kg
- Self-latching ability without power for fire applications
- Fail Secure monitored operation
- Holding force up to 680 kg
- Multi-voltage: automatic 12–30 VDC selection with back EMF and reverse polarity protection
- Low profile design — 40 mm protrusion into headroom
- Monitored: locked and unlocked status
- Robust stainless steel and aluminium construction
- Low current draw: 12 VDC – 250 mA after 1s (initial 830 mA); 24 VDC – 140 mA after 1s (initial 530 mA)
Fire Rating & Testing
- Successfully fire rated up to 2 hours on fire door assemblies to AS1905.1:2005 (Part 1: Fire resistant door sets)
- Up to 4 hours fire resistance when self-latching in approved fire door applications
- UL1034 approved — highest level
- RCM certified
- Internal testing achieved 500,000 operational cycles (250,000 required)
Specifications
- Item Code: ES6000M-2
- Voltage: 12–30 VDC (auto-selecting)
- Start Current: 830 mA @12 V / 530 mA @24 V
- Holding Current: 250 mA @12 V / 140 mA @24 V
- Holding Force: 680 kg static; 70 ft-lbs dynamic strength
- Pre-load: Up to 300 kg
- Monitoring: Locked and unlocked
- Endurance: 250,000 cycles (tested to 500,000)
- Environment: -20 °C to +60 °C
- Lock Body: Cast aluminium
- Lock Bolt: Solid stainless steel hook
What's In The Box
- ES6000M-2 hook lock mortice body
- Satin stainless steel faceplate
- Fixing screws
- Installation instructions
Suitable Uses
- Heavy-duty applications
- Swing or sliding doors
- High air pressure environments (pre-load rated)
- Fire-rated doors requiring self-latching hook locks
Dispatch & Returns
- Estimated Warehouse Dispatch: 11 Days
š ï¸ Please note: This is a Non-Returnable Item.
Download PDF Resources
|
Lockwood Electromechanical Door Solutions Catalogue |
|
Lockwood 25 Year Mechanical Warranty (Conditions Apply) |
Item Code Family
Accessories
Additional Information
Specification Statement: The ES6000 hook lock shall operate under up to 300 kg of pre-load pressure and provide at least 680–700 kg static holding force. The lock shall support multi-voltage 12–30 VDC input with back EMF and reverse polarity protection, and be mountable vertically or horizontally. The lock must be tested to a minimum of 250,000 cycles and achieve 500,000 cycles in internal testing.
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
