Elsema Pentacode Garage Door Remote with 2 Buttons - Blue
The Elsema RH8020 Pentacode remote is a two button keyring transmitter designed for secure control of garage doors and automation systems. It features a dual coding system that allows either traditional dip switch coding or encrypted hopping code transmission for enhanced security.
Key Features
- Two button keyring transmitter with dual channel operation.
- Dual coding system using 12 way dip switch or encrypted hopping code.
- Over 17 billion encrypted code combinations.
- Frequency Hopping Spread Spectrum transmission.
- Simultaneous transmission across five frequencies for interference resistance.
- Operating range up to 200 metres depending on installation conditions.
- Australian designed remote control.
- Certified to AS/NZS 4268, CE and FCC standards.
Specifications
- Item Code: RH8020
- Brand: Elsema
- Buttons: 2
- Channels: 2
- Coding Type: Dip switch or encrypted hopping code
- Frequency Range: 433.100 to 434.700 MHz
- Operating Range: Up to 200 m (site dependent)
- Power Supply: 12 V DC battery
- Battery Type: A23
- Typical Current Draw: 18 mA during transmission
- Battery Life: Approximately 1.5 years with average use
- Colour: Blue
What's In The Box
- Elsema RH8020 two button remote
- A23 battery (pre installed)
- Keyring attachment
Suitable Uses
- Garage door automation systems
- Gate and access control transmitters
- Commercial and residential door operators
- Elsema receiver based automation systems
Item Code Family
| Item Code | Buttons | Description |
|---|---|---|
| RH8020 | 2 | This product |
| RH8021 | 4 | Four button Pentacode remote variant |
Download PDF Resources
Frequently Asked Questions
- Can this remote use both dip switch and encrypted coding?
Yes. It supports traditional 12 way dip switch coding or encrypted hopping code depending on the receiver configuration. - What is the typical operating range?
Up to 200 metres in open conditions, depending on building structure and receiver antenna placement. - Does this remote work with all garage door systems?
It is designed for Elsema receivers operating in the 433 MHz range. Compatibility with other brands should be confirmed before purchase.
Additional Information
- Dual coding allows older dip switch systems to be upgraded without replacing the receiver.
- Frequency hopping spread spectrum reduces the chance of interference in busy radio environments.
- Commonly specified for Australian garage door and gate automation systems.
