CS Technologies 12VDC 5amp Power Supply with Battery Charging - CS9001 - Black
The CS Technologies CS9001 is a 12 V direct current power supply rated at 5 amps with integrated battery charging and relay alarm outputs for power monitoring. It is supplied in a lockable metal enclosure with space to house a 12 V 7 amp-hour battery for backup power when required.
Two relay alarm outputs provide status signalling for alternating current failure and low battery voltage. These outputs can be wired into the power alarm inputs on CS Technologies CSEVO2 and CSEVO4 access control panels for alarm reporting in Evolution software.
Key Features
- 5 amp direct current output with battery charging support.
- Relay alarm outputs for alternating current failure and low battery voltage monitoring.
- Lockable metal enclosure with space for one 12 V 7 amp-hour backup battery.
- Light emitting diode status indicators for alternating current, direct current, and charging state.
- Designed for integration with CS Technologies Evolution access control panels via power alarm inputs.
Specifications
Dimensions
What's In The Box
- CS Technologies CS9001 12 V direct current 5 amp power supply unit with battery charging
- Lockable metal enclosure (installed)
- Battery leads
Suitable Uses
- Power supply for access control panels and related door hardware requiring 12 V direct current supply.
- Installations requiring battery backup capability for continued operation during alternating current outages.
- Sites using CS Technologies Evolution systems where alternating current fail and battery alarms are monitored.
Frequently Asked Questions
- Does this power supply include a backup battery?
No. It includes battery charging and space for one 12 V 7 amp-hour battery, but the battery itself is not specified as included. - What do the relay alarm outputs report?
The relay alarm outputs provide signalling for alternating current failure and low battery voltage status. - Can this be connected to CS Technologies Evolution controllers for alarm reporting?
Yes. The relay alarm outputs can be wired into the power alarm inputs on CSEVO2 and CSEVO4 controllers for reporting through Evolution software.
Additional Information
- This unit is typically installed as the dedicated power source for access control cabinets where monitored power status is required.
- When sizing power budgets, allow for peak current draw of connected locks, readers, and controllers in addition to battery charging current.
- The enclosure is sized for a 12 V 7 amp-hour battery, which is a common capacity used for short-duration access control backup.
