Creone Wiegand to RS-485 and RS-232 Converter Board for Third Party Readers
Please contact Terry's Technical Support. Pre-configuration of this product is required prior to delivery.
The Creone WIDCONVERTORS is a Wiegand data converter board designed to integrate standard Wiegand-based reader technologies into systems requiring RS-232 or RS-485 serial communication. It is commonly used to interface third-party Wiegand readers with Creone cabinets and compatible control systems.
Key Features
- Converts Wiegand reader data to RS-232 or RS-485 serial output.
- Supports integration of standard Wiegand readers into non-Wiegand systems.
- Configurable flash memory to support a wide range of card formats.
- Compatible with Creone cabinets and selected third-party readers.
- Includes relay with normally open and normally closed contacts.
- Supplied with 1.8 metre connection cable.
Specifications
- Item Code: WIDCONVERTORS
- Product Type: Wiegand to serial data converter board
- Supported Reader Interface: Wiegand
- Serial Outputs: RS-232 and RS-485
- Operating System Support: Systems supporting RS-232 or RS-485
- Relay Output: Normally Open and Normally Closed
- Supplied Cable Length: 1.8 metres
- Configuration Requirement: Pre-configuration required prior to delivery
Configurable Parameters
- Number of parity bits to strip.
- Identifier bit count configuration.
- Decimal character data length setting.
- Definition of card-gone character.
- Selection of decimal or hexadecimal output.
- Optional character insertion before or after card data.
- Optional character insertion between site code and identifier.
Download PDF Resources
|
Wiegand RS485 Converter Wiring – Creone Keybox 7 PCB |
What's In The Box
- Creone Wiegand to RS-232 and RS-485 converter board
- 1.8 metre connection cable
Suitable Uses
- Integrating Wiegand readers into Creone cabinet systems.
- Converting Wiegand output to RS-232 or RS-485 for third-party applications.
- Access control systems requiring flexible serial data handling.
Frequently Asked Questions
- Why does this product require pre-configuration?
Configuration is required to match the Wiegand format and serial output expected by the connected system.
- Can this be used with any Wiegand reader?
It is designed to support standard Wiegand devices, subject to correct configuration.
- Does this include an enclosure?
No. It can be installed using the supplied Snap-Trak or an optional enclosure.
Additional Information
- This converter is commonly specified where legacy Wiegand readers must interface with serial-based systems.
- Incorrect configuration can result in unreadable data or communication failure.
- Early engagement with technical support helps avoid commissioning delays.
Technical Drawing
