Description

BDS Black 3 mm Packer Plate for Padbolt Installations – Suits 150 mm and 200 mm Padbolts

The BDS 3 mm Packer Plate is an acrylic spacing plate used during padbolt installation to correct alignment or compensate for uneven mounting surfaces. It is commonly specified where additional stand-off is required between the padbolt and the fixing surface.

Non-Returnable Item
This product is a special order and is not returnable.

Key Features

3 mm packer plate for padbolt installations.
Used to adjust stand-off and improve alignment.
Manufactured from black acrylic.
Designed to suit BDS padbolt series.

Specifications

Product Type: Padbolt packer plate
Material: Acrylic
Finish: Black
Thickness: 3 mm

Available Variants

Item Code	Suits Padbolt Length	Thickness	Material	Finish
09351315	150 mm	3 mm	Acrylic	Black
09351318	200 mm	3 mm	Acrylic	Black

BDS Packer Plates – Item Code Family Overview

Packer Thickness	Material	Suits Hardware / Application	Typical Use Case
3 mm	Acrylic	BDS Padbolt Series (100 mm, 150 mm, 200 mm)	Padbolt alignment and stand-off correction
4 mm	Stainless Steel	Salto XS4 Mini ANSI escutcheons	Electronic lock escutcheon spacing
6 mm	Acrylic	BDS Padbolt Series (150 mm, 200 mm)	Increased padbolt stand-off where required
3 mm / 6 mm	Acrylic	Lockwood 001 strike flange	Strike alignment and frame spacing
3 mm / 6 mm	Acrylic	ADI 444 Blocklok	Blocklok spacing and alignment
3 mm / 6 mm	Acrylic	ADI 5004 Bolt	Bolt alignment and door/frame correction
3 mm / 6 mm	Acrylic	ADI SL5 Bolt	Surface bolt stand-off correction
5 mm	Acrylic	Blank Blocker Plate (275 × 35 mm)	Blocker plate spacing behind furniture
5 mm	Acrylic	Entrance Set Blocker Plate (275 × 35 mm)	Entrance set reinforcement spacing
5 mm	Zinc Plated Mild Steel	EU and EV Entrance Set Blocker Plate (275 × 35 mm)	Higher-load entrance set installations
5 mm	Acrylic	Mortice Lock Blocker Plate (275 × 35 mm)	Mortice lock cut-out blocking and spacing
3 mm / 6 mm	Acrylic	Rim-mounted electric strikes (FSH FES15 / LOX LES15)	Electric strike depth and alignment correction
3 mm / 6 mm	Acrylic	Whitco patio bolt	Patio bolt spacing on uneven surfaces

Frequently Asked Questions

When is a padbolt packer required?
Packers are used when the mounting surface is uneven or when additional clearance is required for correct padbolt alignment.

Can multiple packers be stacked?
Yes. Multiple 3 mm packers can be stacked to achieve the required spacing.

Does this suit other padbolt brands?
It is designed for BDS padbolts. Compatibility with other brands should be confirmed before use.

Additional Information

Often used during padbolt retrofits on uneven masonry or timber surfaces.
Black finish helps maintain a consistent appearance with black padbolt hardware.
Commonly specified in commercial and industrial installations.