ADI Packer Kit 5mm suits LB712
The ADI LB712 packer kit is a 5 mm spacing kit designed for the LB712 body and guides. It is used to correct alignment and spacing during installation or servicing, particularly where door or frame tolerances require the locking bar body and guides to be packed out for smooth operation.
Key Features
- Designed specifically for LB712 models.
- Provides 5 mm pack out for LB712 body and guide alignment.
- Made from black acrylic.
- Used during installation or servicing to achieve smooth locking bar travel.
- Australian made product.
Specifications
- Item Code: ADILB712PACKKIT
- Brand: ADI
- Component Type: Packer kit
- Suits: ADI LB712 models
- Material: Black acrylic
- Thickness: 5 mm
- Country of Manufacture: Australia
Dimensions
| Thickness | 5 mm |
Suitable Uses
- Packing out the LB712 body to achieve correct spindle alignment.
- Packing LB712 guides where frame or door face is uneven.
- Retrofit installs where the locking bar needs additional clearance.
Frequently Asked Questions
- Is this packer kit required for every LB712 installation?
No. It is used when the LB712 body or guides need to be spaced out to achieve correct alignment and smooth operation. - Does this kit suit other locking bar models?
No. This kit is specified to suit LB712 models only. - What is a common installation mistake with packers?
Packing only one guide or only the body can cause the bars to bind. If packing is required, confirm alignment across the full length of the bars before final fixing.
Additional Information
- LB712 packers are commonly used on metal gates where weld seams or frame distortion prevent the locking bar body from sitting flat.
- Before installing packers, check that the locking bars travel freely by hand to confirm whether spacing is needed at the body, the guides, or both.
- If adding packers, confirm screw length is adequate to maintain secure fixing into the door or gate section.
