Lockwood 185 Double Bend Offset Pull Handle
The Lockwood 185 is a double bend offset pull handle designed to complement Lockwood 4800 and 5800 Series narrow stile brass plate furniture. It provides a fixed pull without interfering with cylinder or turn operation, making it suitable for commercial access control installations.
The 185 pull is typically specified on doors fitted with electric strikes and mortice lock systems where a dedicated pull is required in addition to lever or cylinder functionality.
Estimated Warehouse Dispatch: 2 Days
Key Features
- Double bend offset pull handle.
- Designed to suit Lockwood 4800 and 5800 Series narrow stile brass plate furniture.
- Maintains full cylinder and turn functionality without obstruction.
- Brass construction.
- AS1428.1 compliant (Disabled Access).
- Recommended for access control doors fitted with electric strikes.
- Supplied with M4 x 120 mm fixing screws (2 pieces).
- 25 Year Mechanical Warranty.
Fire Rated
- Successfully tested up to X hours.
- Tested in accordance with AS1905.1 (or relevant standard).
- Performance dependent on approved door assembly and installation.
Disability Access Compliance
- Complies with AS1428.1 – Design for access and mobility.
- Compliance applies to handle geometry and clearance when installed correctly.
Specifications
- Brand: Lockwood
- Item Code: 185SC
- Product Type: Double Bend Offset Pull Handle
- Length: 176 mm
- Projection: 48 mm
- Screw Centres: 159 mm
- Finger Clearance: 44 mm
- Material: Brass
- Finish: Satin Chrome Brushed (SC)
- Fixing Method: Through-fix to visible fix brass plate
- Supplied Screws: 2 x M4 x 120 mm
- Compatibility: Lockwood 4800 and 5800 Series Narrow Stile Brass Plate Furniture
- Lock Compatibility: Lockwood 3580 Synergy Series and 3780 Selector Series Mortice Locks (when used with compatible 4800 / 5800 plates)
- Compliance: AS1428.1
Fixing Requirements
The 185 pull is designed with 159 mm screw centres to enable fixing through a standard visible fix brass plate (4900 or 5900 series internal plate formats). Plates are ordered separately and visible fix plates must be specified for both sides of the door where required.
Warranty
- General Warranty: 25 years on mechanical parts and workmanship
- Keys: 12 months
- Finishes: Everbrass 25 yrs; Stainless/Chrome/Anodised 10 yrs; PVD incl. VIVID 10 yrs; Symmetry range 5 yrs; Decorative finishes (Bronze, Antique, Powdercoat) 2 yrs; natural brass ageing excluded
- Stainless Steel: Warranty excludes natural tea staining if not cleaned per care instructions
Download PDF Resources
|
Lockwood Push/Pull Door Handles Catalogue |
|
Lockwood 25 Year Mechanical Warranty |
Frequently Asked Questions
Does this pull include the plate furniture?
No. The 185 pull is supplied separately and must be installed with compatible 4800 or 5800 Series narrow stile brass plate furniture.
Is this suitable for access control doors?
Yes. It is recommended for doors fitted with electric strikes where a fixed pull is required without affecting cylinder or turn operation.
Is this AS1428.1 compliant?
Yes. The 185 pull complies with AS1428.1 accessibility requirements when installed correctly.
Additional Information
The double bend configuration ensures adequate hand clearance and maintains ergonomic access in narrow stile commercial door applications. Confirm plate selection and fixing configuration before installation to ensure correct alignment and compliance.
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
